Decorative Pleated Tree (hollow shell, prints with no infill)

1 views

Bounding box: 100 × 100 × 200 mm
Engine: 3D Printing B-rep
Parameters: 13
Published: November 1, 2026

Download

Free to download and use. See the terms.

The prompt

use only lines with no infill

Parameters

Name	Value	Range
Overall height	200 mm	120 – 320
Base diameter	100 mm	40 – 200
Bottom tier height	70 mm	20 – 140
Middle tier height	65 mm	20 – 140
Middle tier max diameter	75 mm	20 – 190
Bottom tier top diameter	66 mm	10 – 150
Top tier max diameter	48 mm	10 – 120
Middle tier top diameter	40 mm	5 – 100
Tip diameter	2 mm	0.8 – 8
Number of pleats	36 mm	8 – 72
Pleat depth (fraction of radius)	0.07 mm	0.01 – 0.2
Wall thickness - print at 0% infill	2 mm	1 – 4
Vent hole through the base floor (0 = none)	4 mm	0 – 12

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS