Plates and panels
Deck standoff bars x4
- Bounding box
- 42 × 6 × 15 mm
- Engine
- 3D Printing B-rep
- Parameters
- 6
- Published
- November 8, 2026
Download
Free to download and use. See the terms.
The prompt
4 square standoff bars to hold the ESP32 NodeMCU deck above the chassis plate, M3 pilot hole through each, printed standing.
Parameters
| Name | Value | Range |
|---|---|---|
| Bar height | 15 mm | 6 – 40 |
| Bar square width | 6 mm | 5 – 12 |
| Vertical edge radius | 1 mm | 0.2 – 2 |
| Bottom/top edge chamfer | 0.4 mm | 0 – 1 |
| Pilot hole for M3 self-tap | 2.6 mm | 2.4 – 3.4 |
| Gap between bars on the bed | 6 mm | 2 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
PopSocket Origami Phone Holder (Sheet Metal)
It is origami design ,Creat model and give in step file as sheet metal form
Cutaway Syringe Actuated Wing and Flaperon
Create a 3D CAD model of the wing and flaperon mechanism shown in the reference sketch. Model a short wing section with a rounded leading edge, gently curved upper surface, flatter