Plates and panels
Cutaway Syringe Actuated Wing and Flaperon
- Bounding box
- 227.0 × 241 × 65.2 mm
- Engine
- 3D Printing B-rep
- Parameters
- 40
- Published
- November 5, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D CAD model of the wing and flaperon mechanism shown in the reference sketch. Model a short wing section with a rounded leading edge, gently curved upper surface, flatter underside, and tapered trailing edge. Make the wing approximately 240 mm long, 120 mm wide, and 48 mm thick. The rear 60 mm should form a separate movable flaperon, hinged along the wingspan near the upper rear edge of the main wing. Include a hollow interior containing a syringe positioned horizontally, with its nozzle facing the leading edge and its plunger pointing toward the flaperon. Connect the plunger to the flaperon through a short pivoting linkage and control horn, matching the arrangement in the sketch. Show flexible tubing extending from the internal syringe through the underside of the wing to a second, external control syringe. Use a cutaway side panel to reveal the internal syringe, linkage, and hinge. Keep the flaperon, linkage, syringe, and wing as distinct components. Show the flaperon angled downward approximately 30 degrees, while allowing it to rotate back into alignment with the wing. Preserve the overall proportions and mechanical layout of the drawing.
Parameters
| Name | Value | Range |
|---|---|---|
| Airfoil chord | 240 mm | 180 – 320 |
| Wing span | 120 mm | 80 – 250 |
| Maximum airfoil thickness | 48 mm | 30 – 70 |
| Flaperon chord | 60 mm | 40 – 90 |
| Flaperon clearance gap | 0.8 mm | 0.5 – 1.5 |
| Flaperon deflection, positive down | 30 deg | -25 – 35 |
| Upper surface camber | 3 mm | 0 – 8 |
| Syringe barrel diameter | 17.4 mm | 12 – 25 |
| Syringe fit clearance | 0.6 mm | 0.3 – 1.2 |
| Syringe bay front position | 42 mm | 25 – 70 |
| Syringe barrel bay length | 105 mm | 70 – 135 |
| Syringe center height | 25 mm | 18 – 38 |
| Retaining opening width | 14.5 mm | 10 – 22 |
| Plunger channel diameter | 7 mm | 5 – 12 |
| Internal syringe nozzle length | 12 mm | 8 – 20 |
| Syringe nozzle diameter | 4.2 mm | 3 – 7 |
| Syringe finger flange diameter | 26 mm | 21 – 34 |
| Syringe flange thickness | 2.5 mm | 1.5 – 4 |
| Internal plunger extension | 18 mm | 10 – 35 |
| Plunger rod diameter | 5 mm | 3 – 8 |
| Plunger thumb pad diameter | 15 mm | 10 – 22 |
| Hinge axis height | 41 mm | 25 – 55 |
| Hinge knuckle diameter | 10 mm | 7 – 14 |
| Hinge pin diameter | 3.2 mm | 3 – 5 |
| Hinge radial clearance | 0.3 mm | 0.2 – 0.5 |
| Control horn thickness | 6 mm | 4 – 10 |
| Linkage bolt hole diameter | 3.4 mm | 3.2 – 5.5 |
| Linkage plate thickness | 4 mm | 3 – 7 |
| Linkage plate width | 8 mm | 6 – 12 |
| Cutaway front position | 30 mm | 15 – 70 |
| Cutaway length | 145 mm | 90 – 180 |
| Cutaway depth from near side | 53 mm | 25 – 58 |
| Cutaway lower height | 10 mm | 3 – 20 |
| Cutaway opening height | 31 mm | 18 – 45 |
| Flexible tube diameter | 4.5 mm | 3 – 7 |
| Tube underside routing offset | 22 mm | 12 – 35 |
| External syringe diameter | 19 mm | 14 – 28 |
| External syringe barrel length | 62 mm | 45 – 90 |
| External plunger extension | 30 mm | 15 – 45 |
| External syringe side offset | 72 mm | 65 – 100 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Enclosure with Camera Lens & Sun Visor
On the orange front faceplate piece, cut a 15mm circular hole centered horizontally in the upper third section for a camera lens aperture. Directly above this circular hole, projec
Foldable Emergency Rescue Stretcher
Create an editable 3D CAD model of a foldable emergency rescue stretcher matching the reference image. Dimensions: 2100 × 550 mm. Use two parallel silver aluminum tube rails, four