Brackets and mounts
De-aeration & Pre-heating Buffer Tank
- Bounding box
- 400 × 400 × 835 mm
- Engine
- 3D Printing B-rep
- Parameters
- 16
- Published
- October 29, 2026
Download
Free to download and use. See the terms.
The prompt
### Component 5: Kinetic De-aeration & Pre-Heating Buffer Tank - **Placement:** Mounted vertically at the highest physical point of the pre-filtration skid, downstream of the pump, immediately feeding the evaporation core. - **Geometry:** Vertical cylinder with a tangential inlet pipe near the midsection (to induce a vortex), a dome top featuring an automatic air release vent, a cone bottom for residual drainage, and an internal copper heating coil. - **Dimensions:** Tank Diameter: $\varnothing 400\text{ mm}$; Total Height: $800\text{ mm}$. Internal Coils: $\varnothing 12.7\text{ mm}$ ($1/2\text{ inch}$) copper tubing wrapped in an 8-turn helix along the inner walls. - **Materials:** Tank Shell: Marine-grade Aluminum (5052 or 6061) or 304 Stainless Steel. Internal Heat Exchanger Coils: Deoxidized High-Phosphorus (DHP) Copper.
Parameters
| Name | Value | Range |
|---|---|---|
| Tank Diameter | 400 mm | 200 – 600 |
| Total Height | 800 mm | 400 – 1200 |
| Tank Wall Thickness | 4 mm | 2 – 10 |
| Dome Height | 140 mm | 50 – 300 |
| Cone Height | 200 mm | 50 – 400 |
| Bottom Drain Stub Height | 30 mm | 10 – 100 |
| Inlet Pipe Diameter | 50 mm | 25 – 100 |
| Inlet Pipe Length | 120 mm | 60 – 300 |
| Inlet Height on Straight Section | 0.5 mm | 0.1 – 0.9 |
| Air Vent Diameter | 20 mm | 10 – 60 |
| Air Vent Height | 35 mm | 15 – 80 |
| Drain Pipe Diameter | 50 mm | 25 – 100 |
| Coil Tube Diameter | 12.7 mm | 6 – 20 |
| Number of Coil Turns | 8 mm | 4 – 16 |
| Coil Pitch | 45 mm | 20 – 100 |
| Coil Bottom Clearance Above Cone | 30 mm | 10 – 100 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu