DC-DC Converter Module

Create a highly accurate 3D STEP (.step) model for an electronic DC-DC converter component based on the following precise physical dimensions and datasheet specifications: 1. Main Body (Enclosure): - Shape: Rectangular Cuboid (Six-sided shielded metal shielding casing). - Width (X-axis): 25.4 mm (1.00 inch) - Length (Y-axis): 25.4 mm (1.00 inch) - Height (Z-axis): 12.0 mm (0.47 inches) - Shell Material: Aluminum (metallic gray finish) with a slight bottom stand-off height of 0.8 mm. 2. Pin Pitch and Layout (Bottom View / Through-Hole Mounting): - Pin Rows Horizontal Distance: The distance between the Input Pin row (Pins 1, 2) and Output Pin row (Pins 4, 6) is exactly 20.32 mm (0.800 inches), perfectly centered on the 25.4mm x 25.4mm bottom surface. - Left Row (Input): * Pin 1 (+Vin): Located at the top-left quadrant. * Pin 2 (-Vin): Distance from Pin 1 is exactly 5.08 mm (0.200 inches) down the Y-axis. - Right Row (Output): * Pin 6 (+Vo): Located directly opposite to Pin 1 along the X-axis (20.32 mm apart). * Pin 4 (-Vo): Distance from Pin 6 is exactly 20.32 mm (0.800 inches) down the Y-axis. - Missing Pins (NP - No Pin): * Pin 3 and Pin 5 are designated as "NP" (No Pin) and must be omitted from the physical model. 3. Pin Physical Dimensions: - Total Count: 4 physical pins (Pins 1, 2, 4, 6). - Pin Shape: Cylindrical through-hole pins. - Pin Diameter: 1.0 mm (±0.1mm tolerance). - Pin Length (Extending downwards past the base): 6.0 mm MIN. Output Requirements: - Generate a clean, manifold, and industry-standard STEP file (.step / .stp). - Use standard millimeter units (mm) for the export. - Ensure proper face alignment and accurate origin placement (ideally centered at the bottom face of the body or at Pin 1).

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.