Dashboard HUD Mount - 35deg Wedge Base with Anti-Glare Visor

An engineering solid 3D model (STEP/STL) of a dashboard HUD mount. The design is a single-body structure where the 35-degree angle runs strictly along the length (Y-axis), not the width. Overall external dimensions must follow this specific geometry: Total Length along the Y-axis is 90mm. Total Width along the X-axis is 45mm. The bottom base is a flat wedge that compensates for a 35-degree dashboard slope along the 90mm length. This means the side profile (along the 90mm length) forms a right trapezoid. At the top, there is an open rectangular compartment tray with inside dimensions of exactly 90mm (length) by 45mm (width) and an inner depth of 15mm. Wall thickness is 2mm. The rear vertical wall (at the highest point of the 90mm length, facing the driver) must be extended upwards by an additional 12mm to act as a straight anti-glare sunshade visor (total rear wall height from the tray inside bottom is 27mm). The front wall (at the lowest point of the 90mm length, facing the windshield) is exactly 15mm high. Include a 6mm circular cable pass-through hole centered on the rear wall, just above the inside floor of the tray. No artistic organic curves, strict mechanical tolerances in millimeters.

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.