Brackets and mounts
Dashboard Device Tray with Angled Support Base
- Bounding box
- 49.0 × 94.0 × 94.8 mm
- Engine
- Precision B-rep
- Parameters
- 12
- Published
- September 22, 2026
Download
Free to download and use. See the terms.
The prompt
An engineering solid 3D model (STEP/STL) of a horizontal rectangular device tray with angled mounting support legs for a car dashboard. The main tray lies completely horizontal. Internal tray dimensions are precisely: length 90mm, width 45mm, and interior depth 15mm. Wall thickness is 2mm. The rear vertical wall is extended straight upwards by an additional 12mm to act as an anti-glare sunshade visor (total rear wall height 27mm). There is a 6mm circular hole centered on this rear wall for wire routing. Underneath the horizontal tray, there are two solid structural support side-walls extending downwards to form the base. The bottom surface of these support walls is cut at a sharp 35-degree angle relative to the horizontal tray. This 35-degree angle slopes down along the 90mm length of the tray, making the front of the mount 2mm high from the ground and the rear of the mount high enough to maintain a perfect horizontal level on a 35-degree inclined surface. No artistic curves, strict geometric dimensions.
Parameters
| Name | Value | Range |
|---|---|---|
| Interior Length | 90 mm | 30 – 200 |
| Interior Width | 45 mm | 20 – 150 |
| Interior Depth | 15 mm | 5 – 60 |
| Wall Thickness | 2 mm | 1 – 6 |
| Front Wall Height | 15 mm | 5 – 60 |
| Rear Wall / Visor Height | 27 mm | 5 – 80 |
| Cable Hole Dia | 6 mm | 2 – 20 |
| Cable Hole Center Above Tray Floor | 5 mm | 2 – 30 |
| Base Underside Angle | 35 deg | 0 – 60 |
| Front Height Above Dash | 2 mm | 1 – 20 |
| Support Wall Thickness | 4 mm | 2 – 15 |
| Base Floor Plate Thickness | 2 mm | 1 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu