Everything else
Dash Vent - Rotated Louvers + Oval Hose Bulkhead
- Bounding box
- 175.0 × 82.0 × 69.0 mm
- Engine
- Precision B-rep
- Parameters
- 30
- Published
- October 26, 2026
Download
Free to download and use. See the terms.
The prompt
i like it but need to rotate of louvers 90 degrees and need a oval bulkhead on the bottom to connect the vent hose to the bottom
Parameters
| Name | Value | Range |
|---|---|---|
| Body Width (X) | 160 mm | 60 – 300 |
| Body Depth (Y) | 70 mm | 40 – 200 |
| Barrel Depth (Z) | 40 mm | 15 – 120 |
| Bezel Width (X) | 175 mm | 60 – 320 |
| Bezel Height (Y) | 82 mm | 40 – 220 |
| Bezel Thickness | 4 mm | 1.5 – 15 |
| Corner Radius | 8 mm | 0 – 30 |
| Bezel Edge Fillet | 1.5 mm | 0 – 6 |
| Opening Width (X) | 130 mm | 40 – 260 |
| Opening Height (Y) | 45 mm | 20 – 160 |
| Vane Count | 4 pcs | 1 – 12 |
| Vane Pack Rotation | 90 deg | 0 – 180 |
| Vane Tilt | 30 deg | 0 – 70 |
| Vane Pitch | 14 mm | 4 – 40 |
| Vane Chord | 14 mm | 4 – 40 |
| Vane Thickness | 1.5 mm | 0.6 – 5 |
| Vane Drop Below Bezel | 10 mm | 0 – 30 |
| Aim Yaw (whole pack) | 0 deg | -45 – 45 |
| Clip Protrusion | 4 mm | 1 – 12 |
| Clip Thickness | 3 mm | 1 – 10 |
| Clip Height | 12 mm | 0 – 120 |
| Hose Spigot Length (X) | 70 mm | 20 – 130 |
| Hose Spigot Width (Y) | 40 mm | 15 – 90 |
| Spigot Protrusion | 25 mm | 8 – 60 |
| Spigot Wall | 2.5 mm | 1.2 – 6 |
| Hose Bead | 1.5 mm | 0 – 5 |
| Spigot Offset X | 0 mm | -40 – 40 |
| Spigot Offset Y | 0 mm | -15 – 15 |
| Saddle Margin | 5 mm | 0 – 20 |
| Saddle Thickness | 2.5 mm | 1 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm