Brackets and mounts
Cylindrical Mixing Tank with Agitator and Brackets
- Bounding box
- 1104.0 × 1104.0 × 800.3 mm
- Engine
- Precision B-rep
- Parameters
- 11
- Published
- August 26, 2026
Download
Free to download and use. See the terms.
The prompt
create a heavy duty cylindrical mixing tank supported by steel brackets. for the tank, the dimension are as follows: thickness 2mm inner diameter 100cm height 80cm the mixing tank should be equipped with an agitator which takes up 3/4 of the internal height of the tank
Parameters
| Name | Value | Range |
|---|---|---|
| Tank Inner Diameter | 1000 mm | 500 – 2000 |
| Tank Height | 800 mm | 400 – 1500 |
| Tank Wall Thickness | 2 mm | 1 – 10 |
| Agitator Height Ratio | 0.75 ratio | 0.5 – 1 |
| Agitator Shaft Diameter | 20 mm | 10 – 50 |
| Agitator Paddle Width | 100 mm | 50 – 300 |
| Agitator Paddle Thickness | 10 mm | 5 – 20 |
| Bracket Leg Length | 50 mm | 30 – 100 |
| Bracket Width | 40 mm | 20 – 80 |
| Bracket Thickness | 6 mm | 3 – 12 |
| Bracket Hole Diameter | 8 mm | 4 – 16 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent