Brackets and mounts
Cylindrical Electronics Enclosure (Exploded)
- Bounding box
- 136.0 × 136.0 × 21.5 mm
- Engine
- Precision B-rep
- Parameters
- 24
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Create a modular 2-piece cylindrical electronics enclosure with an outer diameter of 43mm and a total stacked height of 80mm. The design must consist of two separate interlocking segments (a lower battery compartment and an upper electronics compartment) using a simple friction-fit joint. Wall thickness is 1.5mm. Segment 1: Lower Battery Compartment (Height 68mm) - A vertical, central cylindrical sleeve to securely hold one vertical 18650 battery (18.5mm diameter, 65mm height). - Internal routing channels to pass battery wires up into the second segment. Segment 2: Upper Electronics Compartment (Height 12mm, mounts on top of Segment 1) - Internal mounting slots arranged around the center for: - TP4056 charging board (25mm x 19mm) with a 8mm x 4mm cutout on the outer wall for the USB port. - MT3608 step-up converter (36mm x 17mm, placed vertically or curved to fit the radius). - Digispark ATtiny85 board (25mm x 19mm). - A 3-pin slide switch with a 7mm x 4mm cutout on the outer wall. - The very outside wall of this upper segment must feature 6 evenly spaced vertical slots or flat recessed faces to press-fit 6 pieces of WS2812b LEDs (5mm x 5mm each). - Wire holes connecting the internal components to the outside LED slots.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer diameter | 43 mm | 30 – 60 |
| Lower compartment height | 68 mm | 50 – 100 |
| Wall thickness | 1.5 mm | 1 – 3 |
| Battery diameter | 18.5 mm | 14 – 22 |
| Battery height | 65 mm | 50 – 75 |
| Sleeve wall thickness | 1.5 mm | 1 – 3 |
| Upper compartment height | 12 mm | 8 – 20 |
| PCB thickness | 1.6 mm | 1 – 2.5 |
| TP4056 width | 25 mm | 20 – 30 |
| TP4056 length | 19 mm | 15 – 25 |
| MT3608 width | 36 mm | 30 – 40 |
| MT3608 length | 17 mm | 12 – 22 |
| Digispark width | 25 mm | 20 – 30 |
| Digispark length | 19 mm | 15 – 25 |
| USB cutout width | 8 mm | 5 – 15 |
| USB cutout height | 4 mm | 3 – 8 |
| Switch cutout width | 7 mm | 5 – 10 |
| Switch cutout height | 4 mm | 3 – 8 |
| LED slot width | 5 mm | 3 – 8 |
| LED slot height | 5 mm | 3 – 8 |
| LED slot depth | 1 mm | 0.5 – 2 |
| Number of LED slots | 6 | 3 – 12 |
| Wire hole diameter | 2 mm | 1 – 4 |
| Layout gap (exploded view) | 10 mm | 5 – 50 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent