Brackets and mounts
Cyberpunk Code Lock Enclosure
- Bounding box
- 90.0 × 70.0 × 42.8 mm
- Engine
- Precision B-rep
- Parameters
- 59
- Published
- October 11, 2026
Download
Free to download and use. See the terms.
The prompt
A 3D model of a cyber-punk futuristic cyberpunk electronic smart code lock enclosure box, optimized for 3D printing, clean watertight mesh. Form factor: two-part enclosure (base and top cover) with screw pillars to join them. Exterior color/texture: matte black tactical military design with clean geometric lines. The model must have precise cutouts and internal mounts for components. Dimensions are exact in millimeters. On the top cover exterior: there is a recessed rectangular slot measuring 65mm in length and 55mm in width, 1mm deep, for a flat 4x3 membrane matrix keypad, including a small slot for ribbon cable routing. Next to it, a clear rectangular window cutout measuring 24mm in length and 17mm in width for an OLED display screen. Inside the enclosure: includes 4 horizontal screw standoffs to securely mount a 25mm x 25mm display PCB directly under the display window. Inside the base: contains a dedicated heavy-duty mounting area with screw holes for a 54mm x 38mm x 28mm solenoid electronic lock, aligned so its 10mm x 10mm locking latch protrudes perfectly through a dedicated side cutout slot of the enclosure. Also inside the base: internal mounting grids/standoffs for a 57mm x 53mm Arduino Nano expansion shield board and a separate 33mm x 25mm x 11mm transistor board. High details, printable engineering prototype enclosure, downloadable as clean OBJ or GLTF format.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Length | 90 mm | 60 – 140 |
| Base Width | 70 mm | 50 – 120 |
| Base Height | 35 mm | 20 – 70 |
| Wall Thickness | 3 mm | 1.5 – 6 |
| Floor Thickness | 3 mm | 1.5 – 6 |
| Cover Length | 90 mm | 60 – 140 |
| Cover Width | 70 mm | 50 – 120 |
| Cover Height | 8 mm | 3 – 15 |
| Cover Screw Hole Dia | 3.2 mm | 2 – 6 |
| Corner Pillar Dia | 8 mm | 5 – 14 |
| Pillar Screw Tap Dia | 2.9 mm | 2 – 5 |
| Pillar Screw Depth | 12 mm | 5 – 25 |
| Keypad Recess Length | 65 mm | 20 – 85 |
| Keypad Recess Width | 55 mm | 20 – 65 |
| Keypad Recess Depth | 1 mm | 0.5 – 5 |
| Keypad Recess Y Offset | 0 mm | -30 – 30 |
| Ribbon Slot Length | 12 mm | 4 – 30 |
| Ribbon Slot Width | 3 mm | 1 – 10 |
| Ribbon Slot Y Position | -27.5 mm | -34 – 34 |
| OLED Window Length | 24 mm | 8 – 40 |
| OLED Window Width | 17 mm | 6 – 30 |
| OLED Window Y Position | 21 mm | -34 – 34 |
| Display PCB Square Size | 25 mm | 12 – 45 |
| Display PCB X Position | 0 mm | -35 – 35 |
| Display PCB Y Position | 14 mm | -30 – 30 |
| Display Standoff Dia | 6 mm | 3 – 12 |
| Display Standoff Height | 12 mm | 4 – 30 |
| Display Screw Hole Dia | 2.2 mm | 1.5 – 5 |
| Display Screw Depth | 9 mm | 2 – 20 |
| Arduino Shield Length | 57 mm | 30 – 80 |
| Arduino Shield Width | 53 mm | 30 – 80 |
| Shield Hole Inset | 8 mm | 2 – 20 |
| Shield Grid X Position | 0 mm | -35 – 35 |
| Shield Grid Y Position | 0 mm | -30 – 30 |
| Shield Standoff Dia | 7 mm | 3 – 14 |
| Shield Standoff Height | 6 mm | 2 – 25 |
| Shield Screw Hole Dia | 2.9 mm | 1.5 – 5 |
| Shield Screw Depth | 5 mm | 2 – 20 |
| Transistor Board Length | 33 mm | 15 – 60 |
| Transistor Board Width | 25 mm | 10 – 50 |
| Transistor Grid X Position | 24 mm | -35 – 35 |
| Transistor Grid Y Position | 14 mm | -30 – 30 |
| Transistor Hole Inset | 3 mm | 1 – 12 |
| Transistor Standoff Dia | 5 mm | 3 – 12 |
| Transistor Standoff Height | 4 mm | 2 – 20 |
| Transistor Screw Hole Dia | 2.2 mm | 1.5 – 5 |
| Transistor Screw Depth | 3.5 mm | 1 – 15 |
| Solenoid Mount Length | 54 mm | 20 – 80 |
| Solenoid Mount Width | 38 mm | 15 – 60 |
| Solenoid Grid X Position | -12 mm | -35 – 35 |
| Solenoid Grid Y Position | 0 mm | -30 – 30 |
| Solenoid Post Dia | 6 mm | 3 – 12 |
| Solenoid Post Height | 8 mm | 2 – 25 |
| Solenoid Screw Hole Dia | 2.9 mm | 1.5 – 5 |
| Solenoid Screw Depth | 6 mm | 2 – 20 |
| Latch Slot Width | 10 mm | 4 – 25 |
| Latch Slot Height | 10 mm | 4 – 25 |
| Latch Slot Y Position | 0 mm | -30 – 30 |
| Latch Slot Z Position | 15 mm | 5 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu