Brackets and mounts
Curved Robot Chassis
- Bounding box
- 120.1 × 100.2 × 180.1 mm
- Engine
- Precision B-rep
- Parameters
- 42
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Modify the chassis to give it a futuristic curved desktop robot design: 1. Slanted Display Face: Angle the middle front face backwards by 15 degrees to create an ergonomically angled, slanted screen mount (70mm x 42mm cutout). 2. Rounded Edges: Apply a 10mm fillet radius to all vertical outer corners and a 5mm fillet to all top and horizontal edges to give it a smooth, sleek appearance. 3. Sculpted Shell: Make the front upper section taper slightly inward near the top. 4. Maintain all internal cutouts: Keep the two 16.5mm ultrasonic sensor holes above the display, the top 9mm camera lens cutout, the bottom caster clearance, and internal mounting space for Pi 3B, L298N, and power bank.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer Width | 120 mm | 80 – 200 |
| Outer Depth | 100 mm | 50 – 200 |
| Half Height (lower shell) | 60 mm | 30 – 150 |
| Wall Thickness | 2 mm | 1 – 5 |
| Lip Height | 3 mm | 1 – 8 |
| Lip Width | 1.5 mm | 0.5 – 5 |
| Taper Angle | 15 deg | 5 – 45 |
| Fillet Radius Vertical | 10 mm | 1 – 20 |
| Fillet Radius Horizontal | 5 mm | 0.5 – 10 |
| Sensor Hole Dia | 16.5 mm | 5 – 30 |
| Sensor Hole Spacing | 30 mm | 10 – 100 |
| Sensor Holes Z Center | 110 mm | 65 – 140 |
| Display Width | 70 mm | 30 – 120 |
| Display Height | 42 mm | 20 – 80 |
| Display Z Center | 90 mm | 70 – 130 |
| Audio Hole Dia | 4 mm | 1 – 10 |
| Audio Grid Width | 40 mm | 10 – 100 |
| Audio Grid Height | 30 mm | 10 – 80 |
| Audio Grid Spacing | 5 mm | 2 – 20 |
| Audio Grid Z Center | 75 mm | 70 – 130 |
| Camera Hole Dia | 9 mm | 5 – 20 |
| Camera Hole X Center | 50 mm | 10 – 190 |
| Camera Hole Y Center | 50 mm | 10 – 190 |
| Standoff Spacing X | 40 mm | 10 – 100 |
| Standoff Spacing Y | 40 mm | 10 – 100 |
| Standoff X Center | 60 mm | 20 – 180 |
| Standoff Y Center | 50 mm | 20 – 180 |
| Standoff Height | 10 mm | 5 – 30 |
| Standoff Diameter | 6 mm | 3 – 12 |
| Floor Slab Length | 80 mm | 40 – 180 |
| Floor Slab Width | 60 mm | 30 – 180 |
| Floor Slab Thickness | 3 mm | 1 – 10 |
| Floor Slab Z | 5 mm | 0 – 50 |
| Battery Slot Length | 50 mm | 20 – 100 |
| Battery Slot Width | 30 mm | 15 – 80 |
| Battery Slot Depth | 10 mm | 1 – 20 |
| Mounting Hole Dia | 5 mm | 2 – 10 |
| Cable Channel Dia | 8 mm | 3 – 15 |
| Cable Channel 1 X | 30 mm | 10 – 190 |
| Cable Channel 1 Y | 50 mm | 10 – 190 |
| Cable Channel 2 X | 90 mm | 10 – 190 |
| Cable Channel 2 Y | 50 mm | 10 – 190 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent