Brackets and mounts
Curved Dovetail Arc Base Mount
- Bounding box
- 36 × 36 × 32 mm
- Engine
- 3D Printing B-rep
- Parameters
- 10
- Published
- November 22, 2026
Download
Free to download and use. See the terms.
The prompt
Create a cylindrical base mount 36 mm outer diameter and 32 mm tall with a 4 mm wall thickness. At the bottom center, add a 15.8 mm diameter blind bore 12 mm deep for a 5/8-27 threaded insert. On the upper half, form a 120-degree curved arc track spanning 60 degrees left and 60 degrees right of vertical, with a 6 mm wide by 4 mm deep tapered dovetail groove along the arc and a central 6.4 mm through-hole for a pivot pin. Add 2 mm fillets on outer edges and 1.5 mm fillets inside the groove.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer diameter | 36 mm | 20 – 80 |
| Height | 32 mm | 15 – 80 |
| Wall thickness | 4 mm | 2 – 8 |
| Insert bore diameter | 15.8 mm | 10 – 30 |
| Insert bore depth | 12 mm | 4 – 25 |
| Arc track radius | 10 mm | 6 – 14 |
| Pivot height | 16 mm | 10 – 24 |
| Pivot hole diameter | 6.4 mm | 3 – 10 |
| Groove opening width | 6 mm | 3 – 10 |
| Groove depth | 4 mm | 1 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Hydraulic Wing and Flaperon Demonstrator
Create a parametric 3D CAD model of a hydraulic aircraft wing and movable flaperon based on the reference sketch. **Wing dimensions:** - 240 mm chord, 120 mm span, 48 mm thickness
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
