Enclosures and housings
Curved Bypass Pruner Blade Assembly
- Bounding box
- 108.3 × 82.8 × 15.0 mm
- Engine
- Precision B-rep
- Parameters
- 30
- Published
- September 13, 2026
Download
Free to download and use. See the terms.
The prompt
A professional technical illustration of a curved bypass pruning shear blade with integrated locking mechanism, isolated on white background. The image shows: BLADE: A curved bypass blade in side profile view. The blade is made of high-carbon steel with a dark grey corrosion-resistant coating. The cutting edge is curved and sharp, designed for clean slicing. A circular pivot hole is visible at the base with a steel rivet. The blade tapers slightly from base to tip. A counter blade is shown slightly offset. LOCKING MECHANISM: A thumb-slide lock button positioned near the pivot. The button is shown in two states side by side: - Left: Locked position — button pushed forward, spring compressed, blade secured closed. - Right: Unlocked position — button pulled back, blade ready to use. A small spring is visible inside the housing. The lock housing is made of reinforced nylon. SPRING-BACK MECHANISM: A small spring steel coil visible near the pivot, responsible for returning the blade to the closed position after cutting. Annotations with thin lines pointing to: curved cutting edge, high-carbon steel, corrosion-resistant coating, pivot rivet, thumb-slide lock button, spring, spring-back mechanism. Style: Professional industrial design technical drawing with clean linework, hatching, and subtle shading. Colours: steel grey, dark grey, orange button. White background, A4 portrait format.
Parameters
| Name | Value | Range |
|---|---|---|
| Blade Length | 120 mm | 60 – 200 |
| Blade Base Width | 20 mm | 10 – 40 |
| Blade Tip Width | 8 mm | 4 – 16 |
| Blade Thickness | 3 mm | 1 – 8 |
| Blade Curvature Angle | 35 deg | 15 – 60 |
| Counter Blade Length | 110 mm | 60 – 200 |
| Counter Blade Base Width | 18 mm | 10 – 40 |
| Counter Blade Tip Width | 8 mm | 4 – 16 |
| Counter Blade Thickness | 3 mm | 1 – 8 |
| Pivot Rivet Diameter | 6 mm | 4 – 10 |
| Pivot Rivet Length | 12 mm | 6 – 20 |
| Spring-back Coil Diameter | 10 mm | 6 – 15 |
| Spring-back Coil Thickness | 5 mm | 2 – 10 |
| Spring-back Coil Hole | 6 mm | 4 – 10 |
| Blade Gap | 0.5 mm | 0 – 2 |
| Lock Housing Length | 30 mm | 20 – 50 |
| Lock Housing Width | 15 mm | 10 – 30 |
| Lock Housing Height | 12 mm | 8 – 25 |
| Lock Housing Wall | 2 mm | 1 – 4 |
| Thumb Button Length | 15 mm | 10 – 25 |
| Thumb Button Width | 10 mm | 6 – 20 |
| Thumb Button Height | 8 mm | 5 – 15 |
| Thumb Button Ridges | 3 | 2 – 6 |
| Button Slide Offset | 0 mm | -5 – 5 |
| Lock Spring Length | 8 mm | 4 – 15 |
| Lock Spring Diameter | 4 mm | 2 – 8 |
| Lock Spring Wire | 1 mm | 0.5 – 2 |
| Housing Position X | 18 mm | 0 – 50 |
| Housing Position Y | 25 mm | 10 – 60 |
| Housing Position Z | 5.75 mm | 0 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Cylindrical Stainless Steel Basket with Folding Handles
Design a cylindrical 304 stainless steel basket with an outer diameter of 200 mm and height of 250 mm. The basket has solid side walls with no perforations. The bottom plate contai
Spur Gearbox
design gearbox
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w