Everything else
CUAS Interceptor UAV - Twin Motor Folding Wing
- Bounding box
- 1288.1 × 1267.0 × 671.4 mm
- Engine
- Precision B-rep
- Parameters
- 31
- Published
- October 24, 2026
Download
Free to download and use. See the terms.
The prompt
a double motor CUAS Interceptor UAV, 2 motors, one in the front one in the back, folding wings, top back layout of wings like a chessna, wings can fold 90 and 45 degrees out, central FC stack and two fuel tanks and payload behind the FC, tube launchable, overall below 25kg MTOW, elegant shape and sensors and others are behind the main front motor.
Parameters
| Name | Value | Range |
|---|---|---|
| Fuselage Length | 1100 mm | 600 – 1800 |
| Fuselage Diameter | 150 mm | 80 – 260 |
| Nose Diameter | 70 mm | 20 – 150 |
| Nose Cone Length | 180 mm | 60 – 400 |
| Tail Diameter | 60 mm | 20 – 150 |
| Tail Cone Length | 220 mm | 60 – 400 |
| Launch Tube ID | 170 mm | 100 – 320 |
| Motor Nacelle Dia | 60 mm | 30 – 120 |
| Motor Nacelle Length | 90 mm | 40 – 200 |
| Propeller Diameter | 380 mm | 150 – 700 |
| Prop Disc Thickness | 4 mm | 2 – 15 |
| Wing Span | 1600 mm | 600 – 3200 |
| Root Chord | 240 mm | 100 – 500 |
| Wing Thickness | 16 mm | 5 – 50 |
| Wing Station From Nose | 700 mm | 300 – 1200 |
| Fold Hinge From Centerline | 280 mm | 60 – 1000 |
| Wing Taper Ratio | 0.35 - | 0 – 0.7 |
| Dihedral | 3 deg | 0 – 15 |
| Wing Fold Angle | 45 deg | 0 – 90 |
| FC Stack Length | 140 mm | 60 – 300 |
| FC Stack Width | 100 mm | 40 – 200 |
| FC Stack Height | 45 mm | 15 – 120 |
| FC Station From Nose | 330 mm | 150 – 900 |
| Fuel Tank Diameter | 50 mm | 20 – 110 |
| Fuel Tank Length | 260 mm | 80 – 600 |
| Fuel Tank Station | 540 mm | 200 – 1100 |
| Payload Pod Diameter | 70 mm | 20 – 140 |
| Payload Pod Length | 160 mm | 50 – 500 |
| Payload Station | 720 mm | 200 – 1300 |
| Sensor Turret Diameter | 60 mm | 20 – 140 |
| Sensor Station From Nose | 230 mm | 60 – 800 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm