CUAS Interceptor Drone - Swept-Fold Wings, Open Belly Bay

1 views

Bounding box: 1104.1 × 1558.4 × 400.0 mm
Engine: Precision B-rep
Parameters: 45
Published: October 24, 2026

Download

Free to download and use. See the terms.

The prompt

more like a drone, the wings shall fold into the direction of flight like a sweept back wing drone, so horizontally. also have the bottom oben to show the hardware and the fuel tanks and the payloud bay

Parameters

Name	Value	Range
Fuselage Length	900 mm	400 – 1600
Fuselage Diameter	160 mm	60 – 260
Launch Tube Diameter	200 mm	100 – 320
Nose Diameter	100 mm	40 – 200
Nose Cone Length	180 mm	60 – 400
Tail Diameter	120 mm	40 – 200
Tail Cone Length	260 mm	60 – 500
Motor Diameter	60 mm	20 – 120
Motor Length	90 mm	30 – 200
Propeller Diameter	400 mm	100 – 700
Propeller Disc Thickness	12 mm	2 – 40
Wing Span	1800 mm	600 – 4000
Wing Root Chord	220 mm	80 – 500
Wing Thickness	14 mm	3 – 40
Wing Chord Center X	380 mm	0 – 900
Fold Hinge Station (semi-span)	700 mm	150 – 1900
Wing Taper Ratio	0.35	0 – 0.8
Dihedral	3 deg	0 – 15
Horizontal Sweep Fold Angle	90 deg	0 – 90
FC Stack Length	110 mm	40 – 250
FC Stack Width	70 mm	30 – 180
FC Stack Height	30 mm	10 – 90
FC Stack X	420 mm	0 – 900
Belly Avionics Box Length	110 mm	30 – 260
Belly Avionics Box Width	30 mm	10 – 90
Belly Avionics Box Height	55 mm	10 – 110
Belly Avionics Box X	490 mm	0 – 900
Conformal Tank Diameter	70 mm	20 – 140
Conformal Tank Length	380 mm	80 – 700
Conformal Tank X	480 mm	0 – 900
Internal Tank Diameter	44 mm	16 – 100
Internal Tank Length	180 mm	40 – 400
Internal Tank X	530 mm	0 – 900
Internal Tank Side Offset	38 mm	10 – 70
Internal Tank Z	9 mm	-40 – 60
Payload Bay Outer Diameter	100 mm	30 – 150
Payload Bay Length	130 mm	40 – 400
Payload Bay X	360 mm	0 – 900
Payload Bay Wall Thickness	10 mm	3 – 25
Belly Opening X	460 mm	0 – 900
Belly Opening Length	340 mm	80 – 700
Belly Opening Width	130 mm	30 – 160
Belly Bay Ceiling Height	25 mm	-20 – 70
Sensor Turret Diameter	70 mm	20 – 140
Sensor Turret X	60 mm	0 – 400

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS