Loading the interactive model…
Interactive 3D model of Crown Gear Set 5:1Gears and transmission
Crown Gear Set 5:1
8 views
- Bounding box
- 124.0 × 124.0 × 38.0 mm
- Engine
- Precision B-rep
- Parameters
- 15
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
make small gear in side dia is 2.3 mm. and big gear inside ida is 25 mm.
Parameters
| Name | Value | Range |
|---|---|---|
| Module | 2 mm | 0.5 – 5 |
| Crown Teeth | 60 count | 10 – 200 |
| Crown Outer Diameter | 124 mm | 20 – 300 |
| Crown Thickness | 10 mm | 2 – 30 |
| Crown Hub Diameter | 40 mm | 10 – 100 |
| Crown Hub Height | 10 mm | 2 – 40 |
| Crown Bore Dia | 25 mm | 2 – 80 |
| Crown Tooth Height | 4 mm | 1 – 20 |
| Crown Tooth Radial Length | 12 mm | 2 – 40 |
| Crown Tooth Width Fraction | 0.5 | 0.2 – 0.8 |
| Pinion Teeth | 12 count | 5 – 200 |
| Pinion Face Width | 12 mm | 2 – 40 |
| Pinion Bore Dia | 2.3 mm | 0.5 – 20 |
| Mesh Offset Radius | 56 mm | 10 – 200 |
| Pinion Axis Height | 9 mm | 0 – 50 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
STEPSTLGLB16 PARAMS
Spur Gear (12 Teeth)
Built a gear with 12 teeth
STEPSTLGLB5 PARAMS
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
STEPSTLGLB7 PARAMS