Loading the interactive model…
Interactive 3D model of Crown Gear and Pinion AssemblyGears and transmission
Crown Gear and Pinion Assembly
46 views
- Bounding box
- 93.0 × 93.0 × 39.0 mm
- Engine
- Precision B-rep
- Parameters
- 15
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
generate a crown gear set with the ration of 5:1 with big gera is60 teeth
Parameters
| Name | Value | Range |
|---|---|---|
| Module | 1.5 mm | 0.5 – 5 |
| Crown Teeth | 60 | 10 – 120 |
| Crown Outer Diameter | 93 mm | 30 – 200 |
| Crown Thickness | 8 mm | 3 – 20 |
| Hub Diameter | 30 mm | 10 – 80 |
| Hub Height | 10 mm | 3 – 25 |
| Bore Diameter | 8 mm | 2 – 20 |
| Tooth Height | 3.5 mm | 1 – 10 |
| Tooth Radial Length | 12 mm | 2 – 40 |
| Tooth Width Fraction | 0.42 | 0.1 – 0.8 |
| Pinion Teeth | 12 | 5 – 40 |
| Face Width | 10 mm | 3 – 30 |
| Bore Diameter | 8 mm | 2 – 20 |
| Mesh Offset Radius | 40.5 mm | 10 – 120 |
| Pinion Axis Height | 14.5 mm | 4 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
STEPSTLGLB16 PARAMS
Spur Gear (12 Teeth)
Built a gear with 12 teeth
STEPSTLGLB5 PARAMS
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
STEPSTLGLB7 PARAMS