Brackets and mounts
CR80 Double-Card Vertical Badge Holder with Sliding Pocket Clip
- Bounding box
- 161.0 × 118.0 × 12.4 mm
- Engine
- Precision B-rep
- Parameters
- 20
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Create a 3D-printable vertical ID badge holder for two standard CR80 cards (85.6 × 54 mm) in one pocket. Design a slim rectangular holder with a solid back, open front, protective side rails and top card insertion. Add a solid 8 mm bottom border with a flat blank surface for a nurse’s name. Add a centered U-shaped finger notch, 18 mm wide and 8 mm deep, at the top of the back wall for easy card removal. On the back, create a secure sliding rail attachment for a separate removable uniform pocket clip, approximately 40 mm wide. The clip must slide into the holder without screws or glue. IMPORTANT: The finger notch must not intersect or weaken the rear clip attachment. Use rounded edges, PETG-compatible wall thicknesses and FDM printing tolerances. Create two separate printable parts: the holder and the removable clip. Export as STL.
Parameters
| Name | Value | Range |
|---|---|---|
| Holder Width | 92 mm | 70 – 120 |
| Holder Height | 118 mm | 90 – 150 |
| Holder Thickness | 6 mm | 4 – 10 |
| Back Wall Thickness | 2.4 mm | 1.6 – 5 |
| Card Pocket Width | 88 mm | 60 – 110 |
| Card Pocket Height | 110 mm | 80 – 140 |
| Card Pocket Depth | 3.6 mm | 2.4 – 6 |
| Solid Name Border Height | 8 mm | 4 – 20 |
| Finger Notch Width | 18 mm | 8 – 40 |
| Finger Notch Depth | 8 mm | 3 – 20 |
| Rear Rail Width | 40 mm | 15 – 60 |
| Rear Rail Height | 40 mm | 15 – 60 |
| Rear Rail Protrusion | 3 mm | 1.5 – 6 |
| Rail Gap Below Notch | 25 mm | 4 – 40 |
| Clip Width | 44 mm | 25 – 70 |
| Clip Overall Height | 55 mm | 30 – 90 |
| Clip Body Thickness | 6 mm | 4 – 12 |
| Tongue/Rail Sliding Clearance | 0.3 mm | 0.1 – 1 |
| Spring Jaw Thickness | 2.4 mm | 1.6 – 5 |
| Print Layout Gap | 25 mm | 0 – 80 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu