Gears and transmission
CPO Fluid Skid Assembly
- Bounding box
- 620.0 × 420.0 × 805.0 mm
- Engine
- Precision B-rep
- Parameters
- 36
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
Create a highly precise 3D CAD mechanical assembly model of a compact chemical processing fluid skid for crude palm oil (CPO), following a vertical closed-loop flow path with 1/2" and 1" stainless steel tubing, including the following exact components and connections: 1. TOP FEED TANK: A 2-liter vertical cylindrical tank wrapped with an external silicone heating jacket. It has a bottom outlet. 2. SUCTION LINE (LINE 01): A 1/2" vertical suction pipe running straight down from the tank bottom outlet. 3. ISOLATION VALVE (VALVE 1): A 1/2" Tri-Clamp manual isolation ball valve installed on LINE 01. 4. GEAR PUMP: A compact 24V DC micro-gear pump mounted securely to the bottom base plate of the skid frame, with its inlet connected to the outlet of Valve 1. 5. DISCHARGE LINE (LINE 02): A 1/2" pipe exiting the pump outlet, leading into a 90-degree elbow that directs the fluid further down toward the absolute bottom of the skid. 6. BOTTOM MANIFOLD ASSEMBLY: At the lowest point of the skid, a 90-degree elbow changes the fluid direction to flow vertically UPWARD into a 1" diameter stainless steel main pipe (LINE 03). 7. PT100 INLINE SENSOR: Along the vertical 1" upward pipe, an inline fitting contains a PT100 temperature sensor inside a thermowell, measuring the upward fluid temperature. 8. FLOW CELL BLOCK & PROFOSS 2: Positioned vertically above the PT100 sensor, a solid 1-inch stainless steel rectangular flow cell block is integrated into the 1" upward pipe line. A large cylindrical FOSS ProFoss 2 WR analytical sensor head is bolted horizontally and flush to the front face of this 1" flow cell block. 9. 3-WAY VALVE (VALVE 2): Located on the top return line (LINE 04) after the flow cell, a 3-way diversion valve is installed, with one side branch serving as a horizontal Drain/Sample Port. 10. DIP TUBE RETURN (LINE 05): The main return line exits Valve 2 and enters the top of the feed tank, extending down as a submerged anti-bubble dip tube that terminates near the bottom of the tank. Output the full assembly inside a clean open-frame sheet metal enclosure as a production-ready STEP (.step) or IGES (.iges) file.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Plate Width | 600 mm | 400 – 800 |
| Base Plate Depth | 400 mm | 300 – 600 |
| Base Plate Thickness | 10 mm | 5 – 20 |
| Post Height | 500 mm | 300 – 700 |
| Post Flange Width | 40 mm | 25 – 60 |
| Post Thickness | 4 mm | 3 – 10 |
| Tank Outer Diameter | 120 mm | 60 – 200 |
| Tank Height | 200 mm | 100 – 400 |
| Tank Wall Thickness | 2 mm | 1 – 5 |
| Tank Bottom Outlet OD | 12.7 mm | 6 – 25 |
| Bottom Outlet Length | 20 mm | 10 – 50 |
| Heating Jacket Thickness | 5 mm | 2 – 10 |
| 1/2" Pipe Outer Diameter | 12.7 mm | 6 – 25 |
| 1/2" Pipe Wall Thickness | 1.65 mm | 0.5 – 3 |
| 1" Pipe Outer Diameter | 25.4 mm | 15 – 50 |
| 1" Pipe Wall Thickness | 2.77 mm | 1 – 5 |
| Suction Line (LINE01) Length | 150 mm | 50 – 300 |
| Discharge Line (LINE02) Length | 100 mm | 50 – 200 |
| Vertical Discharge (LINE03) Length | 400 mm | 200 – 600 |
| Return Line (LINE05) Length | 380 mm | 200 – 500 |
| Valve1 Body Length | 100 mm | 50 – 200 |
| Valve1 Body Diameter | 50 mm | 25 – 100 |
| Valve2 Body Length | 150 mm | 80 – 250 |
| Valve2 Body Diameter | 60 mm | 30 – 100 |
| Pump Length | 120 mm | 60 – 200 |
| Pump Width | 80 mm | 40 – 150 |
| Pump Height | 100 mm | 50 – 200 |
| Pump Port Diameter | 12.7 mm | 6 – 25 |
| PT100 Sensor Length | 100 mm | 50 – 200 |
| PT100 Sensor Diameter | 20 mm | 10 – 40 |
| Flow Cell Width | 100 mm | 60 – 150 |
| Flow Cell Depth | 60 mm | 40 – 100 |
| Flow Cell Height | 60 mm | 40 – 100 |
| ProFoss2 Diameter | 100 mm | 60 – 150 |
| ProFoss2 Length | 200 mm | 100 – 300 |
| ProFoss2 Flange Diameter | 120 mm | 80 – 180 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a