Brackets and mounts
Corn Grater Enclosure Assembly
- Bounding box
- 1155.0 × 850.0 × 1200.0 mm
- Engine
- Precision B-rep
- Parameters
- 41
- Published
- August 11, 2026
Download
Free to download and use. See the terms.
The prompt
"Generate a 3d design of the external housing/enclosure only for a motorized corm grating machine used in enset (Ensete ventricosum) corm processing. Do not model internal mechanisms (grating drum, shaft, bearings, motor, drive train) — exterior surfaces and outer geometry only, as a single solid body or a lightweight multi-body shell assembly. Overall form and dimensions: Compact floor-standing or table-mounted industrial food-processing machine Overall envelope: [insert target L x W x H, e.g., 900 mm x 600 mm x 1200 mm] Stainless-steel food-grade appearance (smooth panels, rounded edges, no exposed sharp corners) External features to include: Feed hopper — open top intake, sloped/funnel geometry, sized for hand-feeding corm pieces up to ~300 mm Main housing body — enclosed cabinet covering the grating chamber, with smooth continuous outer panels Discharge chute/outlet — outlet opening at the base or side for pulp discharge, positioned below the hopper Access panel/door — hinged or removable panel on the side for cleaning/maintenance access, with visible seam lines and a latch or handle Base/support frame — four-leg or plinth base with leveling feet, raising the housing off the floor Control panel mount — small flush-mounted or externally attached box on the side for a power switch/e-stop button Motor housing bump-out — an external mounting bulge or shroud on one side/rear indicating where the motor sits, even though the motor itself isn't modeled Ventilation slots or grille (optional, for motor cooling) on the housing side Surface/style requirements: Smooth, continuous surfaces typical of stainless-steel sheet metal fabrication (bent/rolled panels, welded seams) Rounded fillets on all external edges (food-safety compliant, no sharp corners) Panel seams and visible bolt/latch details modeled as light surface features, not functional hardware Output requirements: Clean, watertight solid (or shell) suitable for rendering/visualization and general layout reference — not for manufacturing detail No internal components, no cutaway views, no hidden geometry
Parameters
| Name | Value | Range |
|---|---|---|
| Housing Length | 900 mm | 500 – 1500 |
| Housing Width | 600 mm | 400 – 1000 |
| Housing Height | 700 mm | 500 – 1200 |
| Leg Height | 150 mm | 100 – 300 |
| Leg Square Side | 50 mm | 30 – 80 |
| Foot Diameter | 60 mm | 40 – 100 |
| Foot Thickness | 10 mm | 5 – 20 |
| Rail Width (horizontal cross-section) | 40 mm | 20 – 60 |
| Rail Height (vertical cross-section) | 30 mm | 15 – 50 |
| Hopper Top Square | 400 mm | 300 – 500 |
| Hopper Bottom Square | 200 mm | 100 – 300 |
| Hopper Height | 300 mm | 200 – 400 |
| Hopper Rearward Offset | 150 mm | 0 – 300 |
| Chute Width | 200 mm | 100 – 300 |
| Chute Height (at housing) | 200 mm | 100 – 300 |
| Chute Depth (outward) | 150 mm | 100 – 250 |
| Chute Vertical Drop | 100 mm | 50 – 200 |
| Chute Vertical Center | 300 mm | 150 – 500 |
| Panel Width (Y) | 500 mm | 300 – 600 |
| Panel Height (Z) | 600 mm | 400 – 700 |
| Panel Thickness | 5 mm | 2 – 10 |
| Handle Width | 30 mm | 10 – 60 |
| Handle Height | 30 mm | 10 – 60 |
| Handle Depth | 20 mm | 10 – 40 |
| Control Box Width | 150 mm | 100 – 200 |
| Control Box Height | 120 mm | 80 – 200 |
| Control Box Depth | 80 mm | 50 – 120 |
| Control Box Angle | 10 deg | 0 – 30 |
| Control Box Z Center | 780 mm | 600 – 850 |
| Motor Bump Depth | 250 mm | 150 – 350 |
| Motor Bump Width | 300 mm | 200 – 400 |
| Motor Bump Height | 300 mm | 200 – 500 |
| Motor Bump Y Center | 150 mm | 0 – 300 |
| Motor Bump Z Center | 500 mm | 300 – 800 |
| Grille Width | 200 mm | 100 – 300 |
| Grille Height | 150 mm | 80 – 250 |
| Grille Z Center | 750 mm | 500 – 850 |
| Slot Count | 5 | 1 – 10 |
| Slot Width | 180 mm | 100 – 190 |
| Slot Height | 10 mm | 5 – 20 |
| Slot Spacing | 25 mm | 15 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent