Brackets and mounts
Conveyor Camera Enclosure Box
- Bounding box
- 160.0 × 100.0 × 120.0 mm
- Engine
- Precision B-rep
- Parameters
- 10
- Published
- September 21, 2026
Download
Free to download and use. See the terms.
The prompt
Generate a modular, rectangular industrial camera enclosure box with an open bottom, designed to mount over a mini conveyor system. The outer dimensions are 160mm in length, 100mm in width, and 120mm in height, with a constant wall thickness of 4mm. The bottom face of the box is completely open. On the top ceiling face, place a single, perfectly centered circular hole with a diameter of 30mm to serve as a camera lens viewport. Concentric to this camera hole, add four M3 threaded mounting holes arranged in a square pattern spaced exactly 28mm apart to mount an industrial camera bracket. On the lower section of the two opposite 100mm wide side walls, cut out matching rectangular arches that are 60mm wide and 45mm high, positioned right at the bottom edge to allow a 50mm wide conveyor belt and moving capsules to pass straight through the enclosure. All internal corners should have a structural fillet radius of 2mm. Output as a clean, parametric solid model with editable dimensions.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer Length (X) | 160 mm | 60 – 400 |
| Outer Width (Y) | 100 mm | 40 – 300 |
| Outer Height (Z) | 120 mm | 40 – 400 |
| Wall Thickness | 4 mm | 1.5 – 12 |
| Camera Viewport Dia | 30 mm | 6 – 80 |
| M3 Square Pattern Spacing | 28 mm | 10 – 60 |
| M3 Hole Dia (2.5 tap / 3.4 clear) | 2.5 mm | 1.5 – 6 |
| Conveyor Arch Width | 60 mm | 10 – 90 |
| Conveyor Arch Height | 45 mm | 5 – 100 |
| Internal Corner Fillet | 2 mm | 0.5 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu