Gears and transmission
Conveyor Belt Assembly
- Bounding box
- 483 × 100 × 83 mm
- Engine
- 3D Printing B-rep
- Parameters
- 6
- Published
- November 6, 2026
Download
Free to download and use. See the terms.
The prompt
Create a very simple 3D model of a conveyor belt. Requirements: - Two identical cylindrical pulleys positioned at opposite ends. - Both pulleys must have parallel horizontal axes. - One continuous flat conveyor belt wrapped around both pulleys. - The belt must run straight between the pulleys, with one upper section and one lower return section. - Keep the pulleys exposed and clearly visible. - No motor, no frame, no shafts, no bearings, and no additional components. - Simple geometry, clean design, and realistic proportions. - Make the model suitable for beginner mechanical CAD practice. - Create the entire assembly as one 3D model. Pulley diameter: 80 mm Pulley width: 100 mm Distance between pulley centers: 400 mm Belt width: 100 mm
Parameters
| Name | Value | Range |
|---|---|---|
| Pulley diameter | 80 mm | 20 – 200 |
| Pulley width | 100 mm | 20 – 200 |
| Pulley center-to-center distance | 400 mm | 100 – 1000 |
| Pulley rim chamfer | 1.2 mm | 0 – 4 |
| Belt width | 100 mm | 10 – 200 |
| Belt thickness | 2 mm | 1 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled