Everything else
Constant-Curvature Camber Plate
- Bounding box
- 96.0 × 9.4 × 6.0 mm
- Engine
- Precision B-rep
- Parameters
- 24
- Published
- October 21, 2026
Download
Free to download and use. See the terms.
The prompt
기존에 주어진 지점별 곡선까지의 거리를 0cm~-1cm범위로 수정하면서 곡선의 모든구간의 곡률이 평균곡률의 10%이내로 들어오도록 만들어줘
Parameters
| Name | Value | Range |
|---|---|---|
| Chord Length | 120 mm | 40 – 400 |
| Plate Thickness | 6 mm | 2 – 30 |
| End Flat Width | 12 mm | 0 – 40 |
| Hole Diameter | 5 mm | 2 – 16 |
| Hole Inset From End | 30 mm | 5 – 180 |
| Corner Radius | 1.2 mm | 0 – 6 |
| Min Curve Offset | -10 mm | -30 – -1 |
| Max Curve Offset | 0 mm | -9 – 5 |
| Arc Blend (1 = pure arc) | 1 | 0 – 1 |
| Curvature Tolerance | 10 % | 1 – 50 |
| P1 X | 15 mm | 1 – 380 |
| P2 X | 30 mm | 1 – 380 |
| P3 X | 45 mm | 1 – 380 |
| P4 X | 60 mm | 1 – 380 |
| P5 X | 75 mm | 1 – 380 |
| P6 X | 90 mm | 1 – 380 |
| P7 X | 105 mm | 1 – 380 |
| P1 Curve Offset | -4.2 mm | -10 – 0 |
| P2 Curve Offset | -7.2 mm | -10 – 0 |
| P3 Curve Offset | -8.9 mm | -10 – 0 |
| P4 Curve Offset | -9.5 mm | -10 – 0 |
| P5 Curve Offset | -8.9 mm | -10 – 0 |
| P6 Curve Offset | -7.2 mm | -10 – 0 |
| P7 Curve Offset | -4.2 mm | -10 – 0 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm