Brackets and mounts
Connector – 4‑Slot Interface
- Bounding box
- 60.1 × 100.0 × 40.1 mm
- Engine
- Precision B-rep
- Parameters
- 23
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
Modify ONLY the interface between the existing divider wall and the existing connector. Do NOT change the overall size or appearance of either part. The goal is to create a precise sliding and locking interface. DIVIDER WALL Keep the current dimensions. Modify only the connection area. Requirements: • Side rails that slide into matching guide channels. • 0.25 mm clearance per side for smooth sliding. • 45° lead-in chamfers at the rail ends. • Positive locking groove near the bottom. • Positive stop so insertion depth is repeatable. • Rounded edges and 1 mm fillets. • Maintain injection molding draft. CONNECTOR Modify only the wall slots. Requirements: • Four identical guide channels matching the divider wall rails. • Matching rail profile. • Lead-in chamfers. • Internal alignment stops. • Internal clamping surface for the thumb screw. • Anti-rattle contact surfaces. • Reinforced screw boss. • Internal ribs connecting the screw boss to each guide channel. • Maintain uniform wall thickness. • 2° draft. • Internal fillets. ASSEMBLY The divider wall must: • Slide smoothly into the connector. • Self-align during insertion. • Stop automatically at the correct depth. • Lock securely when the thumb screw is tightened. • Have minimal wobble after tightening. • Be removable without damage. Optimize for repeated assembly and injection molding. Do not redesign the product. Only engineer the interface between the divider wall and the connector.
Parameters
| Name | Value | Range |
|---|---|---|
| Hub Diameter | 60 mm | 30 – 120 |
| Hub Height | 40 mm | 20 – 80 |
| Wall Thickness | 3 mm | 2 – 8 |
| Slot Width | 8 mm | 4 – 20 |
| Slot Depth | 6 mm | 3 – 15 |
| Screw Boss Diameter | 12 mm | 6 – 24 |
| Screw Hole Diameter | 4.2 mm | 2 – 10 |
| Clamp Slot Thickness | 2 mm | 1 – 5 |
| Sliding Clearance (per side) | 0.25 mm | 0.1 – 0.5 |
| Lead-in Chamfer (45°) | 1 mm | 0.5 – 3 |
| Locking Ridge Width | 1.5 mm | 1 – 3 |
| Locking Ridge Height | 1 mm | 0.5 – 2 |
| Guide Rail Width | 2 mm | 1 – 4 |
| Guide Rail Height | 1.5 mm | 0.5 – 3 |
| Anti‑rattle Bump Radius | 1 mm | 0.5 – 2 |
| Rib Thickness | 1.5 mm | 0.8 – 3 |
| Rib Root Fillet | 0.5 mm | 0.2 – 1.5 |
| External Fillet | 1 mm | 0.5 – 3 |
| Internal Fillet | 0.5 mm | 0.2 – 1.5 |
| Top Edge Radius | 2 mm | 1 – 5 |
| Draft Angle (degrees) | 2 ° | 0 – 5 |
| Foot Height | 3 mm | 1 – 6 |
| Foot Diameter | 6 mm | 3 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent