Gears and transmission
Compound Planetary Gearbox with End Plates
- Bounding box
- 160.0 × 160.0 × 51.0 mm
- Engine
- Precision B-rep
- Parameters
- 22
- Published
- October 22, 2026
Download
Free to download and use. See the terms.
The prompt
Gearbox End Plates: Circular flanges with central bearing holes, bolt circle pattern matching the outer casing, thickness 5mm.
Parameters
| Name | Value | Range |
|---|---|---|
| Module | 2 mm | 0.5 – 6 |
| Pressure Angle | 20 deg | 14.5 – 25 |
| Sun Teeth | 12 teeth | 6 – 40 |
| Planet Stage 1 Teeth | 24 teeth | 8 – 60 |
| Planet Stage 2 Teeth | 12 teeth | 6 – 40 |
| Planet Count | 3 count | 2 – 8 |
| Face Width | 8 mm | 2 – 30 |
| Compound Stack Gap | 2 mm | 0 – 10 |
| Shaft Diameter | 6 mm | 2 – 20 |
| Sun Shaft Length Above Carrier | 40 mm | 10 – 120 |
| Planet Shaft Length | 20 mm | 5 – 80 |
| Carrier Diameter | 120 mm | 40 – 200 |
| Carrier Thickness | 6 mm | 2 – 20 |
| Center Distance Clearance | 0.5 mm | 0 – 2 |
| End Plate Diameter | 160 mm | 60 – 300 |
| End Plate Thickness | 5 mm | 1 – 20 |
| Central Bearing Bore | 10 mm | 3 – 40 |
| Bolt Circle Diameter | 140 mm | 40 – 280 |
| Bolt Hole Diameter | 5 mm | 2 – 16 |
| Bolt / Post Count | 6 count | 3 – 12 |
| Post Wall Thickness | 3 mm | 1 – 10 |
| Top Plate Gap Above Gears | 2 mm | 0 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled