Gears and transmission
Compound Planetary Gear Set
- Bounding box
- 100.0 × 100.0 × 40.0 mm
- Engine
- Precision B-rep
- Parameters
- 14
- Published
- October 22, 2026
Download
Free to download and use. See the terms.
The prompt
Compound Planetary Gears Set: Sun gear center with shaft, multi-stage planet gears with matching teeth profile, designed for high torque reduction ratio.
Parameters
| Name | Value | Range |
|---|---|---|
| Gear Module | 1.5 mm | 0.5 – 4 |
| Pressure Angle | 20 deg | 15 – 30 |
| Sun Gear Teeth | 24 teeth | 8 – 60 |
| Planet Stage 1 Teeth | 18 teeth | 8 – 60 |
| Planet Stage 2 Teeth | 12 teeth | 8 – 50 |
| Planet Count | 3 count | 2 – 5 |
| Gear Face Width | 8 mm | 2 – 20 |
| Compound Stage Gap | 2 mm | 0.5 – 10 |
| Shaft Diameter | 6 mm | 2 – 20 |
| Sun Shaft Length | 35 mm | 10 – 80 |
| Planet Shaft Length | 30 mm | 10 – 80 |
| Carrier Diameter | 100 mm | 20 – 200 |
| Carrier Thickness | 5 mm | 2 – 15 |
| Center Distance Clearance | 3 mm | 0 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled