Everything else
Compact Barcode Verifier Scanner Unit
- Bounding box
- 150.0 × 90.0 × 42.0 mm
- Engine
- Precision B-rep
- Parameters
- 28
- Published
- October 26, 2026
Download
Free to download and use. See the terms.
The prompt
saya mau membuat sistem barcode verificator, dimana alatnya dibangun dari scanner dan 2 motor dc gulungan barcodenya.,, coba buatkan desain compactnya alat tersebut
Parameters
| Name | Value | Range |
|---|---|---|
| Base Length | 150 mm | 80 – 280 |
| Base Width | 90 mm | 50 – 180 |
| Base Thickness | 8 mm | 4 – 20 |
| Base Corner Radius | 12 mm | 2 – 30 |
| Roller Pod Diameter | 30 mm | 18 – 60 |
| Roller Pod Length | 30 mm | 15 – 60 |
| Pod Offset from Center | 50 mm | 25 – 90 |
| Pod Axis Height | 22 mm | 10 – 60 |
| Motor Bore Diameter | 13 mm | 6 – 28 |
| Motor Bore Depth | 20 mm | 5 – 45 |
| Shaft Through Bore | 4.5 mm | 2 – 12 |
| Front Recess Diameter | 20 mm | 8 – 45 |
| Front Recess Depth | 3 mm | 0.5 – 10 |
| Scanner Tower Base Length | 44 mm | 20 – 90 |
| Scanner Tower Base Width | 34 mm | 16 – 70 |
| Scanner Tower Top Length | 34 mm | 10 – 80 |
| Scanner Tower Top Width | 26 mm | 10 – 60 |
| Scanner Tower Height | 32 mm | 10 – 70 |
| Top Window Length | 26 mm | 6 – 60 |
| Top Window Width | 16 mm | 4 – 40 |
| Top Window Depth | 3 mm | 0.5 – 10 |
| Scanner Module Bay Width | 24 mm | 6 – 50 |
| Scanner Module Bay Height | 14 mm | 5 – 40 |
| Scanner Module Bay Depth | 18 mm | 4 – 40 |
| Cable Exit Hole | 6 mm | 2 – 16 |
| Mounting Hole Diameter | 3.4 mm | 1.5 – 8 |
| Mounting Hole Inset X | 30 mm | 15 – 60 |
| Mounting Hole Inset Y | 14 mm | 5 – 35 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm