Brackets and mounts
CommScope AD Pro 8-Port Pedestal Drop-Over Bracket
- Bounding box
- 120 × 120 × 83 mm
- Engine
- 3D Printing B-rep
- Parameters
- 19
- Published
- October 30, 2026
Download
Free to download and use. See the terms.
The prompt
that's not what I'm thinking, i want the bracket to connect to the case through the two top bolt holes and i want the literal bracket that connects to the pedestal be a square upside down cup that rests over the pedestal u bracket
Parameters
| Name | Value | Range |
|---|---|---|
| Plate width | 120 mm | 60 – 220 |
| Plate depth | 80 mm | 40 – 180 |
| Plate thickness | 4 mm | 2 – 10 |
| Plate corner radius | 8 mm | 0 – 25 |
| Pitch of the two top bolt holes | 70 mm | 20 – 200 |
| Bolt line from plate front edge | 45 mm | 10 – 160 |
| Case screw clearance hole | 3.4 mm | 2 – 8 |
| Slot length for fit-up | 6 mm | 0 – 20 |
| Cup outside square | 44 mm | 25 – 120 |
| Cup height | 34 mm | 12 – 100 |
| Cup wall thickness | 4 mm | 2 – 12 |
| Cup vertical edge rounding | 2 mm | 0 – 10 |
| Riser width | 34 mm | 10 – 110 |
| Riser height, plate to cup | 45 mm | 20 – 120 |
| Riser thickness at top | 5 mm | 2 – 12 |
| Extra riser thickness at base | 6 mm | 0 – 20 |
| Pedestal bolt slot width | 5 mm | 3 – 12 |
| Pedestal bolt slot length | 16 mm | 6 – 80 |
| Pedestal slot centre height above rim | 15 mm | 6 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu