Brackets and mounts
Combine Reel Tine Prototype
- Bounding box
- 34.0 × 45.0 × 336.5 mm
- Engine
- Precision B-rep
- Parameters
- 10
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Create a simple one-piece agricultural combine reel tine prototype. Make a rectangular reinforced mounting base connected to one long, straight, narrow finger. The finger should taper gradually from the thick root to a narrow rounded tip. Add large smooth fillets where the finger connects to the base. Overall length: 300 mm Base width: 45 mm Base height: 70 mm Base thickness: 20 mm Finger width at root: 25 mm Finger thickness at root: 14 mm Finger width at tip: 12 mm Finger thickness at tip: 8 mm Keep it symmetrical, solid, watertight, and editable. Do not add textures, colors, screws, holes, clamps, or extra pieces.
Parameters
| Name | Value | Range |
|---|---|---|
| Base width | 45 mm | 40 – 60 |
| Base height | 70 mm | 60 – 80 |
| Base thickness | 20 mm | 15 – 25 |
| Finger width at root | 25 mm | 20 – 30 |
| Finger thickness at root | 14 mm | 10 – 18 |
| Finger width at tip | 12 mm | 8 – 16 |
| Finger thickness at tip | 8 mm | 4 – 12 |
| Overall length | 300 mm | 290 – 310 |
| Fillet radius (junction) | 5 mm | 1 – 10 |
| Fillet radius (tip) | 3 mm | 1 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent