Brackets and mounts
Coconut Lid Spoon Holder with Snap Clip and Leaf Spoon
- Bounding box
- 64.1 × 45.2 × 35.1 mm
- Engine
- Precision B-rep
- Parameters
- 29
- Published
- September 17, 2026
Download
Free to download and use. See the terms.
The prompt
Design the top of the COCO ICE CREAM coconut lid with a simple built-in holder for a removable spoon. The spoon is a gold, leaf-shaped spoon with a long curved handle. Create a shallow recessed groove on the outside of the lid where the spoon lies flat. At the top of the groove, add a small raised clip that grips the end of the spoon. The clip should have a small push button. Pressing the button releases the spoon so it can be lifted out completely. The spoon must be: - Fully removable - Secure when stored - Easy to remove by hand - Easy to put back and click into place - Flush with the curved coconut lid when stored Keep the mechanism small, simple and elegant. Do not create a pipe, flange, threaded fitting, or industrial component. Show the lid + recessed spoon groove + clip + release button + detachable leaf spoon as one functional CAD assembly.
Parameters
| Name | Value | Range |
|---|---|---|
| Housing Length | 60 mm | 30 – 120 |
| Housing Width | 45 mm | 20 – 100 |
| Housing Height | 16 mm | 6 – 40 |
| Lid Dome Radius | 45 mm | 20 – 120 |
| End Latch Length | 6 mm | 2 – 20 |
| End Latch Width | 6 mm | 2 – 20 |
| End Latch Height | 5 mm | 1 – 15 |
| Side Button Diameter | 8 mm | 3 – 20 |
| Side Button Height | 4 mm | 1 – 12 |
| Body Fillet Radius | 2 mm | 0.5 – 6 |
| Groove Length | 50 mm | 20 – 90 |
| Groove Width | 16 mm | 8 – 40 |
| Groove Depth | 3 mm | 1 – 8 |
| Clip Length | 10 mm | 4 – 25 |
| Clip Width | 16 mm | 6 – 30 |
| Clip Height Above Lid | 5 mm | 2 – 15 |
| Clip Post Thickness | 3 mm | 1 – 10 |
| Clip Jaw Clearance | 0.5 mm | 0.1 – 2 |
| Push Button Diameter | 5 mm | 2 – 12 |
| Push Button Height | 2 mm | 0.5 – 8 |
| Push Button From Clip End | 3.5 mm | 1 – 10 |
| Spoon Thickness | 3 mm | 1 – 6 |
| Leaf Bowl Length | 14 mm | 6 – 30 |
| Leaf Bowl Width | 12 mm | 5 – 30 |
| Bowl Dish Depth | 1 mm | 0.2 – 3 |
| Handle Length | 22 mm | 8 – 55 |
| Handle Width | 3 mm | 1.5 – 10 |
| Handle Curvature (Bow) | 1.5 mm | 0 – 8 |
| Handle Tip Inset In Jaw | 1 mm | 0.2 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu