Brackets and mounts
Coaxial Nested Pod EAD Thruster
- Bounding box
- 100.0 × 83.1 × 200.1 mm
- Engine
- Precision B-rep
- Parameters
- 17
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
An industrial CAD blueprint and 3D technical schematic cross-section of a "Coaxial Nested Pod Electroaerodynamic (EAD) Thruster". Overall Structure & Geometry: - The entire assembly is oriented vertically. - Main Outer Shell: A perfectly cylindrical tube split vertically into two identical modular clamshell halves. Along the vertical split line, there are raised external mounting tabs secured with non-conductive nylon hex bolts and nuts. - Main Airflow Path: Fresh air enters open at the top, passes downward through the cylinder, and exits as ionized wind at the bottom. Internal Coaxial Pod (The Core): - Centered perfectly inside the outer shell is a separate, modular, bullet-shaped inner pod made of smooth dielectric material. - Pod Top: The top of this inner pod is a completely CLOSED, pointed aerodynamic nose cone facing UPWARD, exactly splitting the downward airflow from Stage 1. - The inner pod is split horizontally into two halves (Upper Pod Half and Lower Pod Half) joined by an interlocking tongue-and-groove seam. Grids & Ionization Zones: - Stage 1 (Top of Outer Shell): Contains a horizontal wire emitter mesh (1st Emitter) and a parallel accelerator grid suspended above the inner pod's nose cone. - Stage 2 (Inside the Inner Pod): The lower half of the inner pod is hollow, containing an internal secondary ionization zone with a nested horizontal wire mesh grid. Air Intake Vents (The Louvers): - Four aerodynamic, hollow air ducts (gills/louvers) bridge the gap from the outside atmosphere, cutting through the outer shell walls at sharp downward angles of 25-degrees and 15-degrees, channeling fresh external air directly INTO the hollow internal cavity of the inner pod. Style & Aesthetics: - Clean lines, professional aerospace engineering diagram, blueprint style on graph paper background, highly detailed annotations, crisp mechanical rendering, no chaotic artifacts.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer Shell Height | 200 mm | 100 – 350 |
| Outer Shell Diameter | 80 mm | 50 – 120 |
| Wall Thickness | 4 mm | 1 – 10 |
| Inner Pod Diameter | 50 mm | 30 – 80 |
| Upper Pod Height | 100 mm | 50 – 150 |
| Lower Pod Height | 80 mm | 50 – 100 |
| Nose Cone Angle (deg) | 30 deg | 15 – 60 |
| Emitter Mesh Diameter | 70 mm | 50 – 90 |
| Wire Thickness | 1 mm | 0.5 – 2 |
| Accel Grid Diameter | 70 mm | 50 – 90 |
| Grid Spacing | 2 mm | 1 – 5 |
| Secondary Grid Diameter | 40 mm | 20 – 60 |
| Wire Thickness | 0.5 mm | 0.2 – 1.5 |
| Louver Length | 50 mm | 30 – 80 |
| Louver Width | 20 mm | 10 – 30 |
| Bolt Length | 20 mm | 15 – 30 |
| Bolt Diameter (M5) | 5 mm | 3 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu