Loading the interactive model…
Interactive 3D model of Coasterbot AssemblyEverything else
Coasterbot Assembly
17 views
- Bounding box
- 239.0 × 185.0 × 99.7 mm
- Engine
- Precision B-rep
- Parameters
- 32
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Create me a coasterbot that can automatically navigate on a table, spend beverage coasters and collect used coasters.
Parameters
| Name | Value | Range |
|---|---|---|
| Chassis Length | 150 mm | 100 – 300 |
| Chassis Width | 100 mm | 80 – 200 |
| Chassis Height | 30 mm | 20 – 50 |
| Wall Thickness | 2 mm | 1 – 5 |
| Base Thickness | 10 mm | 2 – 20 |
| Ground Clearance | 7.5 mm | 2 – 20 |
| Wheel Diameter | 40 mm | 20 – 80 |
| Wheel Width | 10 mm | 5 – 30 |
| Motor Diameter | 20 mm | 10 – 40 |
| Motor Length | 30 mm | 10 – 60 |
| Wheel Center Height | 20 mm | 10 – 50 |
| Caster Ball Diameter | 15 mm | 10 – 30 |
| Dispenser Slot Length | 95 mm | 50 – 120 |
| Dispenser Slot Width | 95 mm | 50 – 120 |
| Dispenser Height | 40 mm | 20 – 80 |
| Bin Inner Length | 100 mm | 60 – 150 |
| Bin Inner Width | 100 mm | 60 – 150 |
| Bin Inner Height | 30 mm | 20 – 80 |
| Bin Wall Thickness | 2 mm | 1 – 5 |
| Bin Ramp Angle | 30 deg | 10 – 60 |
| Sensor Length | 20 mm | 10 – 40 |
| Sensor Width | 10 mm | 5 – 20 |
| Sensor Height | 10 mm | 5 – 20 |
| Front Sensor Y Offset | 30 mm | 10 – 45 |
| Down Sensor X Offset | 5 mm | 0 – 30 |
| Board Length (X) | 30 mm | 20 – 60 |
| Board Width (Y) | 50 mm | 20 – 60 |
| Board Height | 15 mm | 5 – 20 |
| Battery Length (X) | 70 mm | 40 – 100 |
| Battery Width (Y) | 40 mm | 20 – 70 |
| Battery Height | 20 mm | 10 – 30 |
| Gap Dispenser–Bin | 30 mm | 0 – 50 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
STEPSTLGLB24 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS