Brackets and mounts
CNC Milling Base Plate
- Bounding box
- 270.0 × 270.0 × 6.0 mm
- Engine
- Precision B-rep
- Parameters
- 8
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Design a square mechanical base plate for CNC milling. Material: Aluminium 6061-T6. Overall Dimensions: 270mm width x 270mm length x 6mm thickness. Features: 1. Four corner mounting holes: 8.5mm diameter through-holes, centered at 25mm distance from each adjacent edge (hole pitch is 220mm x 220mm). 2. Central clearance hole: 25mm diameter through-hole located exactly at the geometric center of the plate. 3. Four mounting holes around the center for the pivot mount plate: M5 threaded holes (or 5mm through-holes) arranged in a 45mm x 45mm square pattern centered around the 25mm central hole. All edges must have a 0.5mm x 45-degree chamfer. Output as a STEP file.
Parameters
| Name | Value | Range |
|---|---|---|
| Side Length | 270 mm | 10 – 500 |
| Thickness | 6 mm | 1 – 20 |
| Corner Hole Diameter | 8.5 mm | 2 – 20 |
| Corner Hole Offset from Edge | 25 mm | 5 – 100 |
| Central Hole Diameter | 25 mm | 2 – 100 |
| Pivot Hole Diameter | 5 mm | 1 – 20 |
| Pivot Hole Spacing | 45 mm | 10 – 200 |
| Chamfer Size | 0.5 mm | 0.1 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
