Gears and transmission
CNC Coolant Management System
- Bounding box
- 485.0 × 263.0 × 404.0 mm
- Engine
- Precision B-rep
- Parameters
- 61
- Published
- October 8, 2026
Download
Free to download and use. See the terms.
The prompt
# TEXTCAD SPEC: CNC Coolant Management System System: Origin: [0,0,0] Scale: 1.0mm Bounds: [-400,-250,-150, 420,270,250] Components: - id: tank type: open_prism_box bounds: [-200,-125,-150, 200,125,150] wall: 10.0 mat: semi_transparent_gray label: "COOLANT SUMP" - id: fluid type: volume_fluid bounds: [-190,-115,-140, 190,115,60] layers: - [emulsion, -140 to 50, milky_blue, "USED COOLANT"] - [tramp_oil, 50 to 55, amber_olive, "TRAMP OIL"] - id: refill_mixer type: venturi_valve pos: [-160,80,160] inlets: [water_D20_Blue, concentrate_D12_Yellow] - id: sensors type: array loc: lid_center items: - [ifm_level, X=-110, Y=0, Z=155, parts: D50_H99_head, D6_H280_probe] - [prominent_pH, X=-35, Y=10, Z=155, parts: D12_H120_glass] - [wika_temp, X=40, Y=10, Z=155, parts: D19_H22_head, D6_H150_probe] - [schmidt_conc, X=110, Y=0, Z=155, parts: D40_H44_steel_prism] - id: filters type: process_system items: - [mesh_basket, bounds: -180,-90,-135, -130,-40,-85, fill: chips] - [dual_cartridge, size: D50_H120_Navy, loc: outside_left_bottom] - [mag_separator, pos: -140,-100,-130, size: D60_L90] - id: oil_skimmer pos: [160,80,155] pulley: D30_L55_axis_x belt: rubber [W=40, T=4, drop=-250_into_fluid] - id: control_cabinet bounds: [-100,-135,-10, 100,-125,110] panels: - [lcd_display, glow_green, dims: 140x2x60, text: "STATUS:OK | MIX:8.5% | TEMP:24.5C | pH:8.8 | LVL:85%"] - [interior, hardware: "Motors, VFDs, Solenoids, Relays, I/O Board"]
Parameters
| Name | Value | Range |
|---|---|---|
| Tank Outer Length X | 400 mm | 100 – 800 |
| Tank Outer Width Y | 250 mm | 100 – 600 |
| Tank Height Z | 300 mm | 100 – 600 |
| Wall Thickness | 10 mm | 2 – 30 |
| Fluid Length X | 380 mm | 100 – 780 |
| Fluid Width Y | 230 mm | 100 – 580 |
| Emulsion Surface Z | 50 mm | -100 – 150 |
| Tramp Oil Layer Thickness | 5 mm | 1 – 30 |
| Mixer Position X | -160 mm | -300 – 300 |
| Mixer Position Y | 80 mm | -200 – 200 |
| Mixer Position Z | 160 mm | 0 – 320 |
| Venturi Body Square | 50 mm | 20 – 120 |
| Venturi Body Height | 80 mm | 20 – 200 |
| Water Inlet Dia | 20 mm | 5 – 60 |
| Concentrate Inlet Dia | 12 mm | 3 – 40 |
| Sensor Mount Height Z | 155 mm | 100 – 260 |
| Level Sensor Head Dia | 50 mm | 10 – 120 |
| Level Sensor Head Height | 99 mm | 10 – 200 |
| Level Probe Dia | 6 mm | 2 – 30 |
| Level Probe Length | 280 mm | 50 – 500 |
| Level Sensor X | -110 mm | -180 – 180 |
| pH Glass Dia | 12 mm | 3 – 40 |
| pH Glass Length | 120 mm | 20 – 300 |
| pH Sensor X | -35 mm | -180 – 180 |
| Temp Sensor Head Dia | 19 mm | 5 – 60 |
| Temp Sensor Head Height | 22 mm | 5 – 80 |
| Temp Probe Dia | 6 mm | 2 – 30 |
| Temp Probe Length | 150 mm | 30 – 400 |
| Temp Sensor X | 40 mm | -180 – 180 |
| Concentration Prism Dia | 40 mm | 10 – 100 |
| Concentration Prism Height | 44 mm | 10 – 120 |
| Concentration Sensor X | 110 mm | -180 – 180 |
| Mesh Basket Cube Size | 50 mm | 20 – 120 |
| Basket Centre X | -155 mm | -180 – 0 |
| Basket Centre Y | -65 mm | -100 – 100 |
| Basket Bottom Z | -135 mm | -145 – 0 |
| Cartridge Filter Dia | 50 mm | 20 – 120 |
| Cartridge Filter Height | 120 mm | 30 – 300 |
| Cartridge Centre X | -260 mm | -400 – -210 |
| Cartridge Centre Y | -20 mm | -200 – 200 |
| Cartridge Centre Z | -80 mm | -140 – 100 |
| Magnetic Separator Dia | 60 mm | 20 – 150 |
| Magnetic Separator Height | 90 mm | 20 – 200 |
| Magnet Centre X | -140 mm | -180 – 180 |
| Magnet Centre Y | -100 mm | -110 – 110 |
| Magnet Bottom Z | -140 mm | -145 – 50 |
| Skimmer Position X | 160 mm | -180 – 180 |
| Skimmer Position Y | 80 mm | -110 – 110 |
| Skimmer Pulley Axis Z | 155 mm | 100 – 260 |
| Skimmer Pulley Dia | 30 mm | 10 – 80 |
| Skimmer Pulley Length | 55 mm | 10 – 120 |
| Belt Width | 40 mm | 10 – 100 |
| Belt Thickness | 4 mm | 1 – 15 |
| Belt Drop Into Fluid | 250 mm | 50 – 350 |
| Cabinet Length X | 200 mm | 50 – 350 |
| Cabinet Thickness Y | 10 mm | 4 – 60 |
| Cabinet Height Z | 120 mm | 30 – 250 |
| Cabinet Centre Y | -130 mm | -200 – -100 |
| Cabinet Centre Z | 50 mm | -100 – 200 |
| LCD Display Length | 140 mm | 20 – 300 |
| LCD Display Height | 60 mm | 10 – 150 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled