Brackets and mounts
CMP 40HX support stand with 4x120mm fan mounts v7
- Bounding box
- 260.0 × 120.0 × 138.0 mm
- Engine
- Precision B-rep
- Parameters
- 12
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Khung đỡ thấp cho CMP 40HX theo ảnh thực tế. Card nằm ngang, mặt 2 quạt GPU hướng ra trước. Giữ bracket trái, rail đỡ riser phía dưới, kê đầu phải. Thêm chỗ bắt 4 fan 120 mm: 2 fan phía trước card thổi trực tiếp vào 2 quạt GPU, 1 fan bên trái và 1 fan bên phải hút khí nóng ra. Phía trên để trống, không làm lồng kín.
Parameters
| Name | Value | Range |
|---|---|---|
| Base length | 260 mm | 240 – 320 |
| Base depth | 120 mm | 100 – 170 |
| Base thickness | 5 mm | 4 – 8 |
| Riser rail width | 14 mm | 10 – 22 |
| Riser rail height | 18 mm | 10 – 30 |
| Riser rail spacing | 46 mm | 30 – 70 |
| Left bracket support height | 115 mm | 95 – 135 |
| Fan mount thickness | 5 mm | 4 – 8 |
| Fan opening diameter | 112 mm | 105 – 116 |
| Fan screw spacing | 105 mm | 100 – 110 |
| Fan screw hole diameter | 4.5 mm | 3.5 – 6 |
| Front fan center height | 78 mm | 65 – 95 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Compression Testing Tower
The central square tower contains a 450 mm lead screw and a parallel 16 mm diameter steel guide shaft. Both are securely supported by bearings. A horizontal sliding block spans be
Radio Fascia Panel Adapter
Create a 3D model of an automotive radio fascia panel adapter. The design consists of two main integrated sections: an outer decorative frame that matches a vehicle dash curve, and
