Gears and transmission
Clip Click Train - Wall Mounted Resistance Band Anchor
- Bounding box
- 152.4 × 254.0 × 82.2 mm
- Engine
- Precision B-rep
- Parameters
- 51
- Published
- October 17, 2026
Download
Free to download and use. See the terms.
The prompt
Create a fully 3D-printable, multi-part CAD model of a compact wall-mounted resistance band exercise anchor called **Clip Click Train (CCT) — Prototype V1**. **DESIGN OBJECTIVE** Design a modern, compact, wall-mounted resistance band attachment system that allows users to perform chest flies, chest presses, rows, shoulder raises, bicep curls, and triceps extensions. The product must have a movable, multidirectional attachment point that follows the direction of resistance band movement, without pulleys, cables, electronics, metal bearings, or metal components. All rigid prototype components must be manufacturable using standard FDM 3D printing. **OVERALL DIMENSIONS** - Height: 254 mm (10 inches) - Width: 152.4 mm (6 inches) - Maximum depth: 76.2 mm (3 inches), including the swivel assembly - Rounded rectangular body with a modern, streamlined fitness-equipment appearance - Matte black main housing with red decorative accents **COMPONENT 1 — WALL-MOUNTED BACKPLATE** - Flat rectangular base, 254 × 152.4 × 10 mm - Rounded exterior corners with a 12 mm radius - Four mounting holes, approximately 8 mm diameter, positioned symmetrically near the corners - Reinforced ribs around the central pivot mounting area - Flat rear surface for positioning against a wall - Separate printable component **COMPONENT 2 — FRONT HOUSING** - 3D-printed shell with curved, beveled edges - Approximately 5 mm shell wall thickness - Raised central section surrounding the swivel attachment - Recessed accent channels on both sides - Embossed text reading "CCT" near the top - Central opening for the rotating attachment mechanism - Separate printable component **COMPONENT 3 — MULTIDIRECTIONAL SWIVEL JOINT** - Design a two-axis articulated swivel mechanism using
Parameters
| Name | Value | Range |
|---|---|---|
| Backplate Width | 152.4 mm | 80 – 300 |
| Backplate Height | 254 mm | 100 – 400 |
| Backplate Thickness | 10 mm | 4 – 20 |
| Backplate Corner Radius | 12 mm | 1 – 30 |
| Mounting Hole Diameter | 8 mm | 4 – 12 |
| Mounting Hole Margin | 20 mm | 8 – 50 |
| Reinforcement Rib Height | 4 mm | 1 – 10 |
| Central Boss Radius | 35 mm | 10 – 60 |
| Rib Width | 6 mm | 2 – 15 |
| Front Housing Depth | 35 mm | 15 – 60 |
| Housing Wall Thickness | 5 mm | 2 – 10 |
| Central Opening Diameter | 50 mm | 20 – 100 |
| Accent Channel Length | 80 mm | 30 – 150 |
| Accent Channel Width | 10 mm | 4 – 20 |
| Accent Channel Depth | 3 mm | 1 – 8 |
| CCT Text Emboss Height | 1.5 mm | 0.2 – 3 |
| Raised Central Radius | 40 mm | 15 – 80 |
| Raised Central Height | 5 mm | 1 – 12 |
| Swivel Yoke Radius | 25 mm | 10 – 40 |
| Swivel Yoke Height | 25 mm | 10 – 40 |
| Yoke Bore Diameter | 6.4 mm | 4 – 12 |
| Yoke Flange Radius | 32 mm | 15 – 50 |
| Yoke Flange Height | 5 mm | 1 – 10 |
| Carousel Outer Radius | 22.5 mm | 10 – 40 |
| Carousel Height | 15 mm | 5 – 30 |
| Carousel Bore Diameter | 6.4 mm | 4 – 12 |
| Clevis Width (X) | 20 mm | 8 – 40 |
| Clevis Height (Y) | 30 mm | 10 – 50 |
| Clevis Depth (Z) | 18 mm | 5 – 35 |
| Clevis Bore Diameter | 6.4 mm | 4 – 12 |
| Tilt Bracket Width (X) | 25 mm | 10 – 50 |
| Tilt Bracket Height (Y) | 30 mm | 10 – 60 |
| Tilt Bracket Depth (Z) | 20 mm | 5 – 50 |
| Tilt Bracket Bore Diameter | 6.4 mm | 4 – 12 |
| Tilt Loop Outer Diameter | 20 mm | 10 – 40 |
| Tilt Loop Inner Diameter | 10 mm | 4 – 20 |
| Tilt Loop Thickness | 8 mm | 2 – 16 |
| Band Loop Outer Diameter | 30 mm | 15 – 60 |
| Band Loop Inner Diameter | 10 mm | 4 – 25 |
| Band Loop Thickness | 12 mm | 3 – 25 |
| Vertical Pin Diameter | 6 mm | 3 – 12 |
| Vertical Pin Length | 30 mm | 10 – 60 |
| Horizontal Pin Diameter | 6 mm | 3 – 12 |
| Horizontal Pin Length | 28 mm | 10 – 60 |
| Pin Head Diameter | 12 mm | 5 – 25 |
| Pin Head Height | 3 mm | 1 – 8 |
| Accent Insert Width (X) | 10 mm | 4 – 20 |
| Accent Insert Length (Y) | 80 mm | 30 – 150 |
| Accent Insert Thickness (Z) | 3 mm | 1 – 8 |
| Accent Insert X Offset | 55 mm | 20 – 100 |
| Maximum Assembly Depth | 76.2 mm | 40 – 120 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled