clawdmeter Gehäuse quer, 3-teilig

1 views

Bounding box: 61 × 41.3 × 61.1 mm
Engine: 3D Printing B-rep
Parameters: 31
Published: November 2, 2026

Download

Free to download and use. See the terms.

The prompt

3-teiliges Querformat-Gehäuse für Waveshare ESP32-S3-Touch-LCD-2, USB-C rechts

Parameters

Name	Value	Range
outer length	61 mm	50 – 75
outer height	41.3 mm	35 – 55
Corner r	6 mm	2 – 10
Wall	2 mm	1.2 – 3
Floor t	2 mm	1.2 – 3
Pcb w	48.2 mm	40 – 60
Pcb h	35 mm	30 – 45
Pcb t	1.6 mm	1 – 2
board offset, as in the reference STL	0.95 mm	-3 – 3
Hole dx	42.2 mm	30 – 50
Hole dy	29.1 mm	20 – 40
Dome d	4.2 mm	3 – 6
M2 self-tapping	1.7 mm	1 – 2.5
dome height = room behind the board	3.4 mm	2 – 8
PCB front to display glass	4.5 mm	2 – 8
Win w	41.2 mm	30 – 48
Win h	31 mm	20 – 35
Frame t	1.6 mm	1 – 3
Lip	1.5 mm	0.8 – 3
-1 left, 1 right (seen from the front)	1 mm	-1 – 1
opening, from the STL	9 mm	7 – 12
Usb h	4 mm	3 – 6
centre height of the USB-C plug	3.8 mm	2 – 10
plug recess, from the STL	21 mm	12 – 26
Recess h	8 mm	5 – 12
Recess d	1.6 mm	0.5 – 3
Foot w	34 mm	20 – 55
Foot len	12 mm	6 – 20
Foot up	20 mm	10 – 35
gap between parts in this view	18 mm	0 – 40
Show board	1 mm	0 – 1

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS