Brackets and mounts
Clamping Knob with M6 Threaded Shaft
- Bounding box
- 40.0 × 40.0 × 40.0 mm
- Engine
- Precision B-rep
- Parameters
- 15
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
Modify the existing clamping knob. Keep the current outside shape, finger grip, and internal reinforcing ribs. Replace ONLY the smooth center shaft. Create an integrated M6 × 1.0 threaded shaft extending 20 mm below the knob. The threaded shaft must have visible helical threads. Add a 2 mm shoulder where the shaft meets the knob. Do not change the knob diameter or grip geometry. This is a functional clamping screw for a mechanical storage organizer connector. Do not create a smooth pin. Do not create a center hole. Do not remove the reinforcing ribs. Only replace the shaft with a realistic threaded screw.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer Diameter | 40 mm | 20 – 80 |
| Knob Height | 20 mm | 10 – 50 |
| Groove Depth | 3 mm | 1 – 10 |
| Groove Width | 4 mm | 2 – 12 |
| Groove Count | 6 | 2 – 12 |
| Hub Diameter | 20 mm | 10 – 50 |
| Hub Height | 8 mm | 4 – 20 |
| Rib Width | 3 mm | 1 – 10 |
| Rib Thickness | 2 mm | 1 – 8 |
| Rib Count | 4 | 2 – 12 |
| Shaft Diameter | 6 mm | 4 – 20 |
| Shaft Length | 20 mm | 10 – 50 |
| Thread Pitch | 1 mm | 0.5 – 3 |
| Shoulder Diameter | 10 mm | 6 – 20 |
| Shoulder Height | 2 mm | 1 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent