Brackets and mounts
Clamping Holster
- Bounding box
- 15.9 × 21.5 × 40.0 mm
- Engine
- Precision B-rep
- Parameters
- 9
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Generate a 3D mechanical clamping holster. Create a vertical cylinder with an outer diameter of 16.0 mm and a height of 25.0 mm. Bore a central vertical hole completely through the cylinder with a diameter of 10.2 mm. Cut a 2.0 mm wide vertical slit entirely down one side of the cylinder wall to allow it to flex as a clamp. On the top flat face of the cylinder, extrude a single vertical rectangular mounting tab that is 5.5 mm thick, 12.0 mm wide, and 15.0 mm tall. Bore a horizontal 3.3 mm through-hole through the center of this tab. Add small external fillets to the top corners of the mounting tab to round it off.
Parameters
| Name | Value | Range |
|---|---|---|
| Cylinder OD | 16 mm | 10 – 30 |
| Cylinder Height | 25 mm | 10 – 50 |
| Bore Diameter | 10.2 mm | 5 – 15 |
| Slit Width | 2 mm | 0.5 – 5 |
| Tab Thickness (radial) | 5.5 mm | 2 – 10 |
| Tab Width (tangential) | 12 mm | 5 – 20 |
| Tab Height | 15 mm | 5 – 30 |
| Tab Hole Diameter | 3.3 mm | 1 – 6 |
| Fillet Radius (tab top) | 1 mm | 0.2 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent