Clamp Adapter Plate (CH-36020 to CH-30600HL)

I cannot generate or export raw 3D CAD files (like .step, .iges, or .sldprt) directly. However, I can provide the precise layout dimensions you need to model this adapter yourself, or you can download the exact 3D models of both clamps directly from the manufacturer. Step 1: Download the Official 3D CAD Files To get the perfect 3D geometry for your design, you can download the official models instantly: • Go to the Clamptek CAD Download Portal. • Search for CH-36020 and CH-30600HL. • You can export them in .STEP, .IGS, or native SolidWorks/AutoCAD formats to drop straight into your CAD software. Step 2: Adapter Plate Design Layout If you are machining a custom "plug-and-play" transition block, use the following engineering layout to map your 3D part. Recommended Plate Dimensions: • Material: Mild Steel (A36 or similar) or 6061-T6 Aluminum. • Thickness: 8 mm (This provides enough thread engagement for the top clamp and handles the 600 kg load capacity upgrade). • Overall Block Size: 55 mm x 50 mm rectanguler block. Hole Pattern Mapping: [ ADAPTER PLATE TOP VIEW ] +-----------------------------------+ --- | (O) M5 M5 (O) | | 36.5 mm | | | CH-30600HL | (o) M5 M5 (o) | | CH-36020 | | | Hole Spacing | (o) (o) | | (Longitudinal) | | | | (O) (O) | | +-----------------------------------+ --- |<- - - - - - 38 mm - - - - - - - ->| CH-30600HL Transverse |<- - - - 26 mm - - - - ->| CH-36020 Transverse • Pattern A: Counter-sunk Holes (Bottom/Fixture Mount) • Matches: Old CH-36020 footprint. • Hole Spacing: 26 mm (width-wise) x 26 mm (length-wise). • Type: Counter-sunk for M5 flat-head screws so the bottom surface remains perfectly flush against your existing fixture. • Pattern B: Tapped Holes (Top/New Clamp Mount) • Matches: New CH-30600HL footprint. • Hole Spacing: 38 mm (width-wise) x 36.5 mm (length-wise). • Type: M5 or M6 blind-tapped holes (at least 6 mm deep). Step 3: 3D Height Compensation Note When you model this in 3D, remember the Centerline Axis Shift: • The center axis height of the CH-36020 plunger is 23.1 mm from its base. • The center axis height of the CH-30600HL plunger is 25.2 mm from its base. Adding an 8 mm adapter plate means your new plunger centerline height will be 33.2 mm (25.2 mm + 8 mm) above your original fixture face. You will need to lower your spindle or adjust your workpiece receiver by exactly 10.1 mm to maintain the exact same centerline alignment.

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.