Brackets and mounts
Circular Sponge Holder
- Bounding box
- 113.0 × 113.0 × 46.0 mm
- Engine
- Precision B-rep
- Parameters
- 8
- Published
- August 30, 2026
Download
Free to download and use. See the terms.
The prompt
Modify the existing sponge holder. Replace the rectangular/square shape with a round circular holder. The sponge cavity must be circular, 107 mm inside diameter and 43 mm deep. Keep the wall thickness at 3 mm. Keep the bottom flat and 3 mm thick. Keep the drainage holes in the bottom. Make the outside of the holder circular and smoothly rounded. Do not change the dimensions of the sponge cavity.
Parameters
| Name | Value | Range |
|---|---|---|
| Inside Diameter | 107 mm | 50 – 200 |
| Inside Depth | 43 mm | 10 – 100 |
| Wall Thickness | 3 mm | 1 – 10 |
| Bottom Thickness | 3 mm | 1 – 10 |
| Hole Diameter | 6 mm | 2 – 12 |
| Hole Count X | 3 | 1 – 5 |
| Hole Count Y | 2 | 1 – 5 |
| Outer Bottom Fillet | 2 mm | 0 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent