Circular Screen-Printed Electrode Chip

1 views

Bounding box: 16.0 × 16.0 × 2.1 mm
Engine: Precision B-rep
Parameters: 18
Published: November 9, 2026

Download

Free to download and use. See the terms.

The prompt

Create screen printed electrode design based off image. The three WEs and counter electrode reference electrode need to fit within the reservoir with a radius of 6 mm.

Parameters

Name	Value	Range
Reservoir radius	6 mm	3 – 12
Reservoir wall width	1 mm	0.2 – 3
Reservoir wall height	0.6 mm	0.1 – 3
Substrate radius	8 mm	6 – 16
Substrate thickness	1.5 mm	0.2 – 5
Printed electrode thickness	0.08 mm	0.01 – 0.5
Working electrode diameter	1.2 mm	0.3 – 4
Working electrode array radius	2.2 mm	0.5 – 4.5
Working electrode angle offset	90 deg	0 – 360
Working electrode angular spacing	120 deg	30 – 180
Counter electrode inner radius	3.6 mm	1 – 5.8
Counter electrode outer radius	4.8 mm	1.2 – 6
Counter electrode start angle	120 deg	0 – 180
Counter electrode end angle	240 deg	180 – 360
Reference electrode inner radius	3.6 mm	1 – 5.8
Reference electrode outer radius	4.8 mm	1.2 – 6
Reference electrode start angle	-20 deg	-180 – 0
Reference electrode end angle	20 deg	0 – 180

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS