Brackets and mounts
Circular Ring Guide Assembly
- Bounding box
- 60.0 × 60.0 × 8.0 mm
- Engine
- Precision B-rep
- Parameters
- 17
- Published
- September 1, 2026
Download
Free to download and use. See the terms.
The prompt
A mechanical circular ring guide assembly, total outer dimensions 60mm by 60mm (6cm x 6cm). The model consists of a outer thin cylindrical ring with a 60mm outer diameter. Inside the ring, there is a central hub with a bearing hole. Four symmetric internal radial linkages extend from the central hub to the inner wall of the outer ring at 90-degree intervals. Each radial linkage features a dual-clevis hinge mechanism with cylindrical pin holes for vertical movement, an internal recess/pocket designed to fit a mechanical compression spring, and a central mounting block that holds a central spindle bearing. Clean mechanical design, no outer legs, fully self-contained inside the 60mm circular perimeter
Parameters
| Name | Value | Range |
|---|---|---|
| Outer ring diameter | 60 mm | 40 – 100 |
| Outer ring wall thickness | 3 mm | 1 – 5 |
| Outer ring height | 6 mm | 3 – 12 |
| Central hub diameter | 12 mm | 6 – 20 |
| Central hub height | 8 mm | 4 – 15 |
| Hub bearing bore | 5 mm | 2 – 10 |
| Radial arm width | 6 mm | 3 – 10 |
| Radial arm height | 5 mm | 2 – 8 |
| Radial arm length (hub to inner wall) | 21 mm | 10 – 30 |
| Central mounting block length | 4 mm | 2 – 10 |
| Central mounting block width | 10 mm | 4 – 16 |
| Outer clevis slot length | 8 mm | 3 – 12 |
| Outer clevis slot width | 2.5 mm | 1 – 5 |
| Clevis pin hole diameter | 2.5 mm | 1 – 4 |
| Spring pocket length | 10 mm | 4 – 20 |
| Spring pocket width | 4 mm | 2 – 8 |
| Spring pocket depth | 2.5 mm | 0.5 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent