Chunky Moai Statue (Tinkercad Primitives)

Create a **3D model of a Moai statue inspired by the Easter Island Moai**, designed specifically to be built in **Tinkercad using only basic geometric shapes**. ### Requirements * Use only basic Tinkercad shapes such as **boxes, cylinders, spheres, cones, and pyramids**. * Do not use complex organic shapes or imported 3D models. * The model must be **solid and suitable for 3D printing**. * All parts must be properly connected. No floating or disconnected pieces. * Keep the number of pieces relatively low so the model is easy to build and modify. * Design the model so it can be **3D printed with little or no support material**. ### Moai Design Create a recognizable and slightly cartoonish Moai with exaggerated facial features: 1. **Body:** Use a large vertical cylinder or several stacked cylinders. Make the body wider at the bottom and slightly narrower toward the top. 2. **Head:** Add a large vertical box or cylinder connected directly to the body. 3. **Forehead:** Add a slightly protruding rectangular piece near the top of the face. 4. **Nose:** Create a large, long, rectangular nose using an elongated box or prism. The nose should be one of the most prominent features. 5. **Eyes:** Add two small circular or hemispherical shapes positioned symmetrically on the face. 6. **Ears:** Add two small cylinders or rectangular blocks on the sides of the head. 7. **Mouth:** Create a simple horizontal mouth using a thin rectangular piece or a shallow indentation. 8. **Chin:** Add a slightly protruding piece below the mouth. 9. **Base:** Place the Moai on a wide rectangular or cylindrical base to make it stable during 3D printing. ### Proportions * The statue should be approximately **2.5 times taller than it is wide**. * The head should make up approximately **40% of the total height**. * The nose should be noticeably larger than the other facial features. * The facial features must be clearly visible after 3D printing. * Keep the design **simple, chunky, and sturdy** rather than detailed or fragile. ### Final Result The final model should look like a **simplified, chunky, slightly funny Moai statue**, while clearly showing that it was constructed using basic Tinkercad shapes. Also provide an **exact list of every basic shape used**, including for each shape: * Shape type * Width * Height * Depth * Approximate position * Rotation, if necessary The instructions should be detailed enough that another person could **recreate the entire Moai in Tinkercad from scratch** using only the provided measurements.

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.