Gears and transmission
Chuck Body
- Bounding box
- 120.0 × 35.0 × 120.0 mm
- Engine
- Precision B-rep
- Parameters
- 10
- Published
- September 21, 2026
Download
Free to download and use. See the terms.
The prompt
Description: The chuck body is the main cylindrical housing. It supports the scroll plate, jaws, bearing and operating mechanism. Drawing dimensions: Outside diameter: Ø120 mm Overall thickness: 35 mm Central opening/pocket as shown in the drawing 4 mounting holes around the body Side opening for the spiral gear/knob Fusion 360: Plane: XZ Plane for the main circular profile Sketch Ø120 mm circle Extrude = 35 mm Create the central pocket/bore. Add the four mounting holes according to the drawing. Add the side hole for the operating gear. Add the required fillets.
Parameters
| Name | Value | Range |
|---|---|---|
| Outside Diameter | 120 mm | 80 – 200 |
| Overall Thickness | 35 mm | 10 – 80 |
| Central Bore Diameter | 60 mm | 20 – 110 |
| Central Bore Depth | 35 mm | 2 – 35 |
| Mounting Hole Diameter | 8 mm | 3 – 20 |
| Mounting Bolt Circle Dia | 100 mm | 50 – 115 |
| Mounting Hole Count | 4 | 3 – 8 |
| Side Hole Diameter | 16 mm | 5 – 30 |
| Side Hole Y Position | 17.5 mm | 2 – 35 |
| Edge Fillet Radius | 1.5 mm | 0.2 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled