Chibi Chopper Keychain

1 views

Bounding box: 71.6 × 53.5 × 8.3 mm
Engine: 3D Printing B-rep
Parameters: 59
Published: November 1, 2026

Download

Free to download and use. See the terms.

The prompt

Create a detailed, fully editable 3D CAD model of a **Tony Tony Chopper (One Piece) chibi-style keychain**. **Design:** - Cute, front-facing Chopper head. - Iconic blue hat with pink brim, pink circular emblem, white X symbol and white dots. - Rounded tan face with large expressive eyes, blue nose and smiling mouth with pink tongue. - Two symmetrical brown antlers and small ears. - Faithful proportions, smooth curves and clean detailing. **Dimensions:** - Overall size: 55 × 50 mm. - Maximum thickness: 4 mm. - Main structural base: 2.5–3 mm. - Keyring hole: 4.5 mm diameter. - Reinforced attachment loop integrated into the top. **Manufacturing:** - Optimize for multicolour FDM 3D printing using PLA. - Separate components by colour. - Use alignment pins or interlocking joints. - Maintain 0.2

Parameters

Name	Value	Range
Face width	50 mm	20 – 100
Face height	46 mm	20 – 80
Face/backplate thickness	3 mm	1 – 6
Face corner radius	8 mm	2 – 15
Ear height radius	4 mm	2 – 8
Ear width radius	3 mm	2 – 6
Ear side inset	1.5 mm	0 – 4
Ear vertical position	14 mm	-20 – 20
Loop outer radius	5.5 mm	3 – 8
Keyring hole diameter	4.5 mm	2 – 8
Loop raise above face	2 mm	0 – 6
Mouth recess width	10 mm	6 – 16
Mouth recess height	6 mm	4 – 10
Mouth recess depth	0.9 mm	0.4 – 2
Mouth vertical position	-12.5 mm	-20 – 0
Hat crown width	46 mm	30 – 70
Hat crown height	22 mm	12 – 40
Hat crown total thickness	3.5 mm	1 – 6
Hat crown dome height	1.5 mm	0.5 – 3
Hat crown base thickness	2 mm	0.5 – 4
Hat crown vertical position	10 mm	-10 – 20
Brim width	48 mm	30 – 70
Brim height	8 mm	4 – 14
Brim thickness	3 mm	1 – 6
Brim vertical position	0 mm	-20 – 20
Emblem diameter	12 mm	4 – 20
Emblem thickness	1 mm	0.4 – 3
White inlay thickness	0.8 mm	0.4 – 2
X bar length	10 mm	4 – 16
X bar width	2 mm	1 – 4
Dot diameter	2 mm	1 – 5
Dot ring radius	8.5 mm	5 – 14
Antler thickness	3 mm	1 – 6
Antler length	10 mm	6 – 18
Antler height/upward reach	14 mm	6 – 20
Antler base radius	4 mm	2 – 8
Antler mid radius	2.5 mm	1 – 6
Antler tip radius	1.5 mm	0.5 – 5
Antler pin diameter	2 mm	1 – 4
Antler pin length	2 mm	1 – 5
Antler base X offset from center	26.5 mm	20 – 35
Antler base vertical position	12 mm	0 – 20
Left antler rotation	135 deg	90 – 180
Right antler rotation	45 deg	0 – 90
Eye width	7 mm	4 – 14
Eye height	9 mm	5 – 16
Eye thickness	1 mm	0.4 – 3
Eye spacing from center	7.5 mm	3 – 15
Eye vertical position	-1.5 mm	-20 – 20
Nose width	7 mm	3 – 14
Nose height	5 mm	2 – 10
Nose thickness	2 mm	0.8 – 5
Nose vertical position	-6.5 mm	-20 – 20
Nose pin diameter	2.5 mm	1 – 5
Nose pin length	1.5 mm	0.5 – 4
Tongue width	8 mm	4 – 16
Tongue height	5 mm	2 – 12
Tongue thickness	1.2 mm	0.4 – 3
Tongue vertical position	-12.5 mm	-20 – 20

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS