Brackets and mounts
Checker & Dice Tray (Short Dice Bay)
- Bounding box
- 372.0 × 44.0 × 14.0 mm
- Engine
- Precision B-rep
- Parameters
- 14
- Published
- September 27, 2026
Download
Free to download and use. See the terms.
The prompt
Reduce the center dice compartment to approximately half of its current length. Do not redistribute the removed space to the checker sections. Instead, make the overall tray shorter by the same amount. Keep: - 15 checker slots on the left - 15 checker slots on the right - the current short-tab checker separator design - the same checker dimensions of 38 mm diameter × 8.5 mm thick - the same tray width, wall thickness, and general proportions Only reduce the length of the center dice bay and shorten the overall tray accordingly. Keep the dice compartment centered between the two checker sections and keep its length parametric so it can be adjusted later.
Parameters
| Name | Value | Range |
|---|---|---|
| Wall Thickness | 2 mm | 1 – 5 |
| Bottom Thickness | 2 mm | 1 – 5 |
| Tray Height | 14 mm | 8 – 30 |
| Corner Fillet Radius | 4 mm | 0 – 6 |
| Checker Slots per Side | 15 slots | 5 – 25 |
| Checker Diameter | 38 mm | 20 – 50 |
| Checker Thickness | 8.5 mm | 3 – 15 |
| Slot Width (per checker) | 9 mm | 5 – 20 |
| Checker Bay Depth (Y) | 40 mm | 25 – 60 |
| Separator Thickness | 2 mm | 1 – 4 |
| Separator Tab Height | 10 mm | 4 – 20 |
| Tab Inward Reach (per side wall) | 4 mm | 2 – 8 |
| Dice Bay Length (X) | 38 mm | 15 – 120 |
| Dice Bay Width (Y) | 40 mm | 20 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu