Brackets and mounts
Champagne Glass Stand (Base+Stem and Cup Holder)
- Bounding box
- 139.5 × 70.0 × 115.0 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- September 9, 2026
Download
Free to download and use. See the terms.
The prompt
Create two parametric FDM-printable CAD parts for an elegant champagne-glass stand holding a 21 cl white PS disposable cup. Cup: 90 mm high, 44 mm bottom diameter, 70 mm maximum diameter, tapered wider upward. PART 1: classic 70 mm round champagne base + slim 100 mm stem. Add a strong integrated tapered male connector at the top: 14 mm diameter base, 11.5 mm top, 10 mm high. No floating overhang. PART 2: elegant organic 20 mm cup holder. Inner diameter 44 mm bottom and 47 mm top. Outer wall must follow the cup's taper. Solid floor supports the cup. Add a blind female socket underneath matching the male connector. Connector must never enter the cup cavity. Use a strong tapered press fit. Holder prints flat-side-down with minimal support. Stem prints vertically. Minimum wall thickness 2 mm. Make both parts watertight/manifold. Export separate STL files. The result must visually resemble an elegant traditional champagne glass, with the plastic cup acting as the bowl.
Parameters
| Name | Value | Range |
|---|---|---|
| Layout Gap | 20 mm | 5 – 50 |
| Base Diameter | 70 mm | 50 – 100 |
| Base Thickness | 5 mm | 3 – 10 |
| Stem Height | 100 mm | 60 – 150 |
| Stem Diameter | 10 mm | 6 – 20 |
| Connector Base Diameter | 14 mm | 10 – 20 |
| Connector Top Diameter | 11.5 mm | 8 – 18 |
| Connector Height | 10 mm | 5 – 20 |
| Holder Height | 20 mm | 10 – 40 |
| Holder Wall Thickness | 2 mm | 1.5 – 5 |
| Cup Bottom Diameter | 44 mm | 30 – 60 |
| Cup Top Diameter | 47 mm | 40 – 70 |
| Socket Depth | 10 mm | 5 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent