Loading the interactive model…
Interactive 3D model of Centrifugal Water Pump AssemblyEverything else
Centrifugal Water Pump Assembly
6 views
- Bounding box
- 169.5 × 82.5 × 60.0 mm
- Engine
- Precision B-rep
- Parameters
- 20
- Published
- August 21, 2026
Download
Free to download and use. See the terms.
The prompt
make a water pump that pumps 3 lt per min
Parameters
| Name | Value | Range |
|---|---|---|
| Casing Length (X) | 80 mm | 50 – 120 |
| Casing Height (Y) | 70 mm | 50 – 100 |
| Casing Depth (Z) | 60 mm | 40 – 100 |
| Casing Wall Thickness | 10 mm | 3 – 20 |
| Impeller Diameter | 50 mm | 25 – 80 |
| Impeller Height | 15 mm | 5 – 30 |
| Vane Count | 6 count | 3 – 12 |
| Vane Thickness | 2 mm | 0.5 – 5 |
| Vane Sweep Angle | 30 deg | 5 – 45 |
| Motor Housing Diameter | 45 mm | 30 – 80 |
| Motor Housing Length | 70 mm | 40 – 120 |
| Motor Flange Diameter | 60 mm | 40 – 100 |
| Drive Shaft Diameter | 6 mm | 3 – 20 |
| Drive Shaft Length | 60 mm | 30 – 120 |
| Inlet Fitting Outer Diameter | 12 mm | 6 – 30 |
| Inlet Bore Diameter | 8 mm | 4 – 20 |
| Inlet Fitting Length | 20 mm | 10 – 50 |
| Outlet Fitting Outer Diameter | 10 mm | 6 – 30 |
| Outlet Bore Diameter | 7 mm | 4 – 20 |
| Outlet Fitting Length | 20 mm | 10 – 50 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
STEPSTLGLB24 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS